HPI Racing 1/10 Bullet ST 3.0 Nitro RTR

Tower Stock# LXBRAJ  •  Manufacturer Stock# 107004
HPI Racing 1/10 Bullet ST 3.0 Nitro RTR (large view)
Notes from our tech department:
This is the radio controlled, glow powered, ready to run, 1/10 scale
Bullet ST 3.0 Stadium Truck from HPI.


Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and
rear skid plates and aluminum center brace
Drive: Four wheel sealed shaft drive
Radio: TF-40 2.4GHz 3-channel with end point adjustments, dual rates,
servo reverse, waterproof steering and throttle servos
Engine: Nitro Star G3.0 with pull starter, two stage air filter with
rain cover, two needle composite body slide valve carburetor, and
ABC liner construction, "A"luminum piston with "B"rass cylinder
liner that is "C"hrome plated
Exhaust: Tuned pipe
Clutch: Two piece racing with 13 tooth steel clutch bell
Fuel Tank: 2.5oz (75cc)
Shocks: Eight oil-filled
Differentials: Bevel gear
Brake: Single drilled steel disc
Ball Bearings: Full set, rubber sealed
Body: Trimmed and painted
Suspension: Extra long arms with steel turnbuckle links
Slipper Clutch: Dual pad, adjustable
Spur Gear: 54 tooth plastic
Wheels: Black chrome, 14mm hex, 2.2" (56mm) wide, 3.2" (82mm)
Tires: HPI Tractor all terrain 2.6" (67mm) wide, 4.8" (124mm)
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Warranty: Two year limited beginning at date of purchase. Valid only
in US, Canada and South America. Not intended for use in the EU.


RTR HPI Bullet ST 3.0 Stadium Truck with Engine, Exhaust, 2.4GHz
Radio, painted Body, 8 AA cells and Instruction Manual


Glow Fuel: Car blend nitromethane with 20-25% nitro content
Fuel bottle, glow starter, maintenance and track equipment


Length: 16.4" (417mm)
Width: 13.2" (336mm)
Height: 6.3" (160mm) adjustable
Wheelbase: 10.7" (272mm)
Track: 10.3" (263mm) outer edges of tires side-to-side
Length: 16.1" (409mm)
Width: 6.7" (170mm)
Height: 4.4" (112mm)


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Spur Gear 1 DTXC1595
2 10x15mm Fr Diff 1 DTXC1595
2 10x15mm Rear Diff 1 DTXC1595
2 5x10mm Fr Diff Case 1 DTXC1535
2 5x10mm Rear Diff Case 1 DTXC1535
2 5x10mm Clutch 1 DTXC1535
4 5x10mm Fr Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535

jxs 10/19/11

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info