Coverite Black Baron Film White 6'

Tower Stock# LXB209  •  Manufacturer Stock# COVQ0711
Coverite Black Baron Film White 6' (large view)
Quantity Discounts Available
Save $2.01
3 for $42.96
Save $4.50
6 for $85.44
Save $9.84
12 for $170.04
Notes from our tech department:
Black Baron Film is a Patented, Flexible High-Gloss Polyester that is
Inexpensive, Easy, Clean and Quick To Use.
This is Applied at Low-Temperature Onto Foam, Fiberglass and Most Plastics.


Super Strong with a Tensile Strength of 25,000 psi (pounds per
square inch)
Light-Weight At Only .25 ounces per square foot
Dry Adhesive Is Activated When Heat Is Applied
Shrinks To A Drum-Tight Finish As It Cools
Molds Crease Free Around Compound Curves and Into Corners
High Gloss Finish, Fuelproof, and Waterproof
Stronger and Lighter Than Traditional Silk and Dope Coverings
May Be Cleaned with Glass Cleaner or MonoKote Cleaner/Polish


One Roll (6' x 27") White, Black Baron Film Covering
One Instruction Sheet


Sealing Iron (COVR2550), Iron Sock (TOPR2175), Heat Gun (TOPR2000).


For Covering Balsa At High-Temperature, Suggest (COVQ0201 COVQ0214).
Black Baron Can Be Used On Top Of High Temperature Covering, But Not

Note: Different Dye Lots Of BlackBaron Paints and Films, May Vary
Slightly In Color Between Production Runs Of These Products.
Black Baron Paint
Black Baron 15' Film
(If Using 3 or More Rolls of the Same Color, Suggest a 15' Roll
to Ensure the Same Dye Lot for the Entire Plane.)

Temperature Range:
Attaching To Foam (Activating The Glue): 150-235F

JAL 8/24/98

Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info