Tamiya 1/10 Avante 2011 4WD Buggy Kit

Tower Stock# LXAUNH  •  Manufacturer Stock# 58489
Tamiya 1/10 Avante 2011 4WD Buggy Kit (large view)
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, electric powered, 1/10 scale
Tamiya Avante 2011 Off-Road Buggy Kit.


Chassis: 0.08" (2mm) thick carbon fiber, double deck configuration
Drive: Four wheel shaft with pin-secured wheel axles
Body: Polycarbonate with wing and chassis fairing
Motor: 25 turn brushed
Electronic Speed Control: TEU-104BK
Shocks: Oil-filled with gold colored cylinders and bottom caps for
easy maintenance
Shock Stays: 0.14" (3.5mm) thick carbon fiber
Suspension: Front and rear multi-link double wishbone, adjustable
metal arms with radius arm protectors and rear anti-roll bar,
Differentials: Front and rear planetary, center ball diff
Tires: High-grip pin spike with foam inserts
Wheels: Front, 1" (25.4mm) wide, 2.2" (57mm) diameter
Rear, 1.4" (35.5mm) wide, 2.2" (57mm) diameter, also
four 1.4" (35.5mm) wide, 2.2" (57mm) diameter cam-loc wheels with
wheel caps
Caster: Adjustable caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Steering: Bell-crank type with servo saver and adjustable linkage


Tamiya Avante 2011 Off-Road Buggy Kit with ESC, 25T motor, oil-filled
shocks, 22 tooth pinion, set of tradional buggy wheels, set of
cam-loc wheels, spike tires with inserts, body, decal sheet and
instruction manual


Radio: 2-channel with one steering servo
Battery: 6-cell stick pack with standard connector
Charger: AC/DC Timed or Peak for 6-cell battery


Length: 16.5" (420mm)
Width: 9.4" (240mm)
Height: 4.5" (140mm)
Wheelbase: 10.2" (260mm)
Tread: 7.9" (200mm) distance from wheel centers, left to right
Gear Ratio: 1:8.33
Minimum Ground Clearance: 1.6" (40mm)
Weight: 2.9lbs (1300g)
Length: 13" (330mm)
Width: 5.9" (150mm)
Height: 2.4" (61mm)


To paint body to match vehicle on box, order the following Tamiya
TAMR8616, PS-16 Metallic Blue TAMR8118, X-18 Semi Gloss Black
TAMR5017, TS-17 Gloss Aluminum TAMR1707, XF-7 Flat Red
TAMR8106, X-6 Orange TAMR1766 XF-66 Light Grey

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
1 5x11mm Gearbox 1 DTXC1547
1 5x8mm Gearbox 1 DTXC1523
2 8x16mm Front Differential 1 DTXC1535
2 2x6mm Front Differential 1 DTXC1501
2 8x16mm Rear Differential 1 DTXC1535
2 3x8mm Rear Differential not carried
2 5x8mm Rear Counter Gear 1 DTXC1523
1 5x11mm Center Diff 1 DTXC1547
1 5x8mm Center Diff 1 DTXC1523
4 5x11mm Rear Axle 2 DTXC1547
4 5x11mm Front Axle 2 DTXC1547

jxs 12/28/10

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info