Phoenix Model Yak 54 Mk2 GP/EP/Gas ARF 66.3"

Tower Stock# LWZ810  •  Manufacturer Stock# PH148
Easy Pay
Request 3 Payments ($85.01, $84.99, $84.99) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/4 scale
Almost Ready to Fly Phoenix Model Yak 54 1.20/20cc Airplane.
Capable of both precise and extreme 3D aerobatics
For Intermediate Modeler/Fliers.


Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Covering: Hangar 9 UltraCote
Radio Compartment: Plywood reinforced
Cowling: Pre-painted Fiberglass
Canopy: Clear with painted pilot figure and dashboard detail
Landing Gear: Prebent aluminum, prebent tailwheel wire
Wheels: Two 4.25" (108mm) rubber main, one 1" (25mm) tail wheel
Fuel Tank w/pre-assembled stopper, approximately 24oz (720cc)
Spinner: Plastic construction red in color, 2.7" (70mm) diameter
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Warranty Period: 90 day limited warranty


ARF Super Cub PA-18 Airplane with Landing Gear, Wheels, Fuel Tank,
Decals, Spinner, Instrument Panel, Pilot, Instruction Manual and


For Glow Operation;
Engine: 1.20 2-stroke, or 1.40 4-stroke

For Gasoline Operation;
Engine: 20cc

For Electric Operation;
Brushless Motor: 1600-2000W
ESC: 120-160A
LiPo Battery: 5S-6S up to 5500 - 6000mAh

Radio: 6-channel
Servos: Six standard high-torque (2-aileron; 2-elevator;
1-rudder; 1 throttle)
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 1200-2000mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.


Wingspan: 66.3" (1684mm)
Weight: 10.3 - 11.4lb (4700 - 5200g)
Length: 63.1" (1605mm)
Wing Area: 848 sq in (54.7 sq dm)
Wing Loading: 28.50 oz sq/in (87 g sq/dm)
Wing Type: NACA Airfoil
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: Per updated information from the factory, the CG
range is 5.5 - 5.9" (140 -150mm) back from the wing's leading
edge measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.43" (11mm) 12% expo 0.51" (13mm) 12% expo
Rudder: 1.4" (35mm) 15% expo 2.4" (60mm) 15% expo
Ailerons: 0.43" (11mm) 10% expo 0.51" (13mm) 10% expo


Following are the colors of Hangar 9 UltraCote used, and order
number for 6' rolls:
White, HANQ1122
Grey, HANQ1139
True Red, HANQ1118
Deep Blue, HANQ1127

If a replacement fuel tank is required, the 24oz DuBro (DUBQ0224),
tank can be used with the purchase of the Gasoline Conversion Kit
Also, the 24oz Sullivan (SULQ1444) can be used with their Gasoline
Conversion Kit, SULQ2684.
Slight modification may be required when installing any
aftermarket fuel tank.
jxs 12/31/15



Product Documents & Files

Industry Reviews

Manufacturer Contact Information