Redcat Racing 1/8 Terremoto V2 BL 4WD LiPo RTR Red

Tower Stock# LWY632  •  Manufacturer Stock# TERREMOTO-V2-RE
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Shipping Restricted ItemDetails
Shipping Note:Details
Product WarningDetails
Easy Pay
Request 3 Payments of $133.33 Details
Notes from our tech department:
This is the Redcat Racing 1/8 scale, 2.4GHz Radio Controlled,
Brushless Electric Powered, Ready to Run Terremoto-V2 Monster Truck
with Red Body.

FEATURES

Chassis: Plastic with aluminum upper plate
Drive: Four wheel shaft
Brushless Motor: 2260Kv with cooling fan
Electronic Speed Control: 80A waterproof, with cooling fan
LiPo Batteries: Two 2S 20C 7.4V 3200mAh with Supertigre connector
Battery Charger: Hexfly HX-A3 wall charger
Radio: RCR2C 2-channel with steering and throttle trim and reverse
and dual rate steering
Steering Servo: High torque 208 oz-in (15kg-cm) waterproof metal gear
Shocks: Oil-filled
Tires: 6.5" (165mm) diameter, 3" (76mm) wide
Wheels: Six spoke beadlock type, black in color
Body: Painted and trimmed polycarbonate
Caster: Adjustable, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Pinion Gear: 13T metal

INCLUDES

RTR Terremoto-V2 Monster Truck with painted Body, 2.4GHz Radio
System, Brushless Motor, ESC, two LiPo Batteries, Charger and
Instruction Manual

REQUIREMENTS

LiPo Charging Bag, Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 21.6" (550mm)
Width: 18.1" (460mm)
Height: 9.5" (240mm) without body
Wheelbase: 14.8" (376mm)
Ground Clearance: 3.7" (95mm) adjustable
Body;
Length: 19.2" (489mm)
Width: 7.1" (180mm) behind front wheels, narrowest point
8.7" (220mm) at rear wheels, widest point
Height: 5.5" (141mm)

COMMENTS

For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 8x16x5mm Rear Uprights 2 DTXC1585
4 8x16x5mm Front Uprights 2 DTXC1585
4 5x10x4mm Gearbox 4 DTXC1535
2 12x18x4mm Fr Diff 1 DTXC1597
2 12x18x4mm Rear Diff 1 DTXC1597

jxs 03/27/17
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information