Hangar 9 Ultra Stick 10cc ARF

Tower Stock# LWQ123  •  Manufacturer Stock# HAN2345
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Coupon discount not allowed by manufacturer for this product
Easy Pay
Request 3 Payments ($76.67, $76.66, $76.66) Details
Notes from our tech department:

FEATURES

Construction: Lightweight balsa and plywood
Wing: One-piece, with operational flaps
Covering: Hangar 9 UltraCote
Landing Gear: Prebent aluminum with steerable tailwheel, optional
Carbon-Z float set (not included) fits in factory installed hard
points in belly of fuselage and takes minutes to convert to floats
Spinner: White plastic 2.25" (57mm) diameter
Fuel Tank: 15oz (443cc)
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.

INCLUDES

ARF Hangar-9 Ultra Stick 10cc 60" Gasoline or Electric Powered Sport
Airplane with Prebuilt Wing, Tail and Fuselage sections, Landing
Gear, Fuel Tank, Spinner, Engine and Motor Mounts and Instruction
Manual

REQUIREMENTS

Radio: At least 6-channel full-range
Servos: Seven standard size (6 for gasoline power option)
Two 3" (76mm) Servo Extensions
Four 6" (152mm) Servo Extensions
Two 9" (229mm) Servo Extensions
For Brushless Power
Motor: Power 52 brushless outrunner
ESC: Compatible with selected motor
LiPo Battery: 5S 18.5V 30C 5000mAh
Battery Charger: Compatible with selected battery
For Engine Power:
Engine: 10cc gasoline
Standard Servo: For throttle
Receiver and Ignition Batteries
Three Wire Switch Harness
Gasoline Safe Fuel Tubing

Propeller, Building and Field Equipment

SPECIFICATIONS

Length: 57" (1448mm)
Flying Weight: 7lbs (3175g)
Wingspan: 60" (1524mm)
Wing Area: 810 sq in (52.3 sq dm)
Airfoil: Symmetrical
Approximate Assembly Time: 7-10 Hours
Approximate Flight Time: 6-8 mins
CG (Center of Gravity): 3-1/2"- 4-1/4" (89mm-108mm) back from the
leading edge of wing
Control Throws Low High
Ailerons: 0.59" (15mm) 1.8" (45mm) up, 1.4" (35mm) down
Elevator: 0.79" (20mm) 1.8" (45mm)
Rudder: 1.8" (45mm) 3.5" (90mm)
Flaps: Takeoff 1.2" (30mm) Landing 1.8 - 2.4" (45 - 60mm)
Expo Low High
Ailerons: 15% 25%
Elevator: 15% 25%
Rudder 15% 25%

COMMENTS

If a replacement fuel tank is needed, the DuBro 14oz (DUBQ0214) with
the Gas Converion Stopper (DUBQ0675), or the Sullivan 14oz
(SULQ1440) with their Gas Conversion Kit (SULQ1442) may be used.
Some modification and trimming to the inside of the fuselage may be
required when installing any aftermarket tank.

jxs 07/27/18
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information