Duratrax Onyx LiPo 2S 7.4V 5000mAh 35C Hard Case XT90

Tower Stock# DTXC2007  •  Manufacturer Stock# DTXC2007
Shipping Note:Details
Product WarningDetails
Quantity Discounts Available
Save $5.40
2 for $114.58
Save $18.00
6 for $341.94
Save $39.59
12 for $680.29
Notes from our tech department:
This is the DuraTrax Onyx 7.4V 5000mAh 35C Hard Case LiPo Battery
with the XT90 Connector


Ideal for 1/10 scale car applications
Prewired with XT90 connector


7.4V 5000mAh 35C Hard Case LiPo Battery with XT90 Connector


Balancer and LiPo compatible charger or LiPo charger with built-in
balancer such as the Onyx 235, DTXP4235


Voltage Rating: 7.4V
Rated Capacity: 5000mAh
Discharge Rating: 35C continuous
Dimensions: 5.4 x 1.8 x 0.87" (138 x 46 x 22mm)
Weight: 10oz (285g)
Discharge Lead/Connectors: 12AWG 3.9" (100mm) Wires, XT90 Connector
Balancing Connector: ElectriFly
Watt Hours: 37Wh


ALWAYS use a LiPo-approved Charger
ALWAYS use a LiPo Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children
All weights include wire leads and plugs
All weights +/- 1 g
All measurements +/- 1 mm

jxs 10/11/16


Manufacturer Contact Information