Robart 85 Degree Mains Robostrut Ready Electric

Tower Stock# ROBQ0527  •  Manufacturer Stock# 511RSE
Robart 85 Degree Mains Robostrut Ready Electric (large view)
Notes from our tech department:
This is a pair of 85 Electric Main Robostrut Ready Landing Gear from Robart.


Compatible with a 3/8" diameter RoboStrut (not included), or
3/16" diameter gear wire
Constructed of aircraft grade aluminum
Amp Out circuitry senses up/down travel limits or an obstruction such
as a gear door and shuts off the motor to prevent draining the
One year warranty on parts, six months warranty on labor covering
manufacturing defects. Warranty void if controller box or actuators
are opened.


Two 85 Electric Main Robostrut Ready Landing Gears, with Control Box
and Instructions


4.8 - 9.0V from any battery type, (6V and above highly recommended)
Robart extensions from control board to retracts;
IMPORTANT, Robart electric retracts use a non-standard plug and
require the use of proprietary Robart extensions instead of
standard servo extensions. Please use the stock numbers below to
order the proper extensions.
ROBM0177 177E12 12" ELC RTRCT SERVO EXT (qty 2)
ROBM0178 177E12S 12" ELC RTRCT SERVO EX (qty 1)
ROBM0179 177E24 24" ELC RTRCT SERVO EXT (qty 2)
ROBM0180 177E24S 24" ELC RTRCT SRVO EXT (qty 1)
*Note: The receiver and auxiliary battery inputs on the control
board use standard servo plugs.


Frame Length: 1-1/8" (29mm)
Frame Width: 3/4" (19mm)
Distance between Mounting Hole Centers: 1-3/8" (31mm) lengthwise
1" (25.4mm) widthwise
Length/end of Actuator to end of Mounting Frame: 3-3/8" (86mm)

jxs 05/30/13
updt jxs 06/09/14

Manufacturer Mailing Address
Additional Manufacturer Contact Info