DuraTrax's Ultralite Clutch Bells Will Work On Some Kyosho 1/8 and 1/10|
Scale Cars, As Well As the Pirate and Mugen Cars.
Non-Full Length Teeth for Reduced Weight and Faster Acceleration.
Made of Hardened Steel for Long Life and Precision Gear Mesh.
Choose from 13 to 18 Tooth Sizes for Any Racers Needs.
One 13 Tooth Clutch Bell
Different Sized Clutch Bearings: One 5x8mm (DTXC1523) and
One 5x8mm Flanged (DTXC1527)
To use this clutch bell with an OS .21 engine, you must also
purchase a 1/4-28 clutch nut
To use this clutch bell with the CZ series OS engines, you must
also purchase a 5mm clutch nut
When using this on the older Rampage series of cars, you may have
to move the throttle servo forward to compensate for the longer
bell and nut.
WILL NOT WORK ON THE DURATRAX CONVERSION KITS, Sandmasters or
RC10 Gas Trucks.
The bell housing is now solid and no longer vented or slotted.