Losi 1/8 LST 3XL-E 4WD Monster Truck BLS RTR w/AVC

Tower Stock# LOSD1004  •  Manufacturer Stock# LOS04015
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Restricted ItemDetails
Notes from our tech department:

FEATURES

Chassis: 0.16 (4mm) thick 6061-T6 aluminum, optional wheelie bar
included
Drive: Four wheel shaft drive with spring retaining coupler to help
keep drive pin in place
Transmission: Sealed metal gear
Differentials: Three, sealed viscous filled bevel gear diff
Radio: 2-channel Spektrum DX2E DSMR with DSMR 6-ch AVC receiver with
Active Vehicle Control built into receiver that allows driver to
adjust amount of traction control, system can also be switched off
telemetry capable radio system (telemetry not included, separate
purchase required)
Steering Servo: SPMSS904 15 scale WP digital
Brushless Motor: Dynamite Fuze four pole 2200Kv brushless sensorless
Electronic Speed Control: Dynamite Fuze 150A brushless waterproof
Suspension: Independent
Steering: Ball bearing supported adjustable servo saver
Shocks: Aluminum body oil-filled, 5mm diameter shock shafts
Body: Molded polycarbonate with screened details, 3XL-E truck flip
top mount
Tires: Monster truck, offroad tread, 7 (178mm) diameter
Wheels: Plastic with blue chrome finish, 17mm hex, 4.1 (104.1mm)
diameter, 4 (101.6mm) wide
Ball Bearings: Full ball bearing drivetrain
Approximate Assembly Time: No assembly required
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.

INCLUDES

Losi RTR 18 scale LST3XL-E Electric Powered 4WD Monster Truck
130A ESC, trimmed Body, Instruction Manual, Brushless Motor
four AA Batteries, .050, 116, 564, 332 Hex Wrenches, Shock
and Turnbuckle Wrenches

REQUIREMENTS

Battery: 2S or 3S 5000mAh 50C Hardcase LiPo with EC5 Connector
Battery Charger: To match selected battery
Needle Nose Pliers
LiPo Charge Bag and track equipment

SPECIFICATIONS

Length: 23.0 (584.2mm) without wheelie bar
Width: 18.5 (469.9mm)
Height: 10.75 (273.1mm)
Weight: 15.5lbs (7.0kg)
Ground Clearance: 3.75 (95.3mm)
Wheelbase: 15.9 (403.9mm)
Front and Rear Track: 10.2 (260mm) distance from outer edges of
wheels measured side-to-side
Internal Gear Ratio: 8.27:1
Final Drive Ratio: 22.30:1
Pinion Gear: 20T
Spur Gear: 54T
Gear Pitch: 1.0 module

COMMENTS

For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x10x3mm Steering 2 LOSC1966
2 15x21x4mm Front Wheels 1 AXIC1243
2 8x16mm Front Wheels 1 LOSC1962
2 15x21x4mm Rear Wheels 1 AXIC1243
2 8x16mm Rear Wheels 1 LOSC1962
4 8x16mm Front Diff 2 LOSC1962
4 8x16mm Center Diff 2 LOSC1962
4 8x16mm Rear Diff 2 LOSC1962
2 8x16mm Spur Gear 1 LOSC1962

jxs 052118
irjxs

Resources

References

Product Documents & Files

Manufacturer Contact Information