Losi 1/10 TENACITY-DB 4WD Desert Buggy RTR w/AVC

Tower Stock# LOSD07**  •  Manufacturer Stock# LOSD07**
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments ($116.67, $116.66, $116.66) Details
Color Availability
Money Saving Combos
Money Saving Combos
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available**


Chassis: 0.20" (5mm) thick composite with bottom loading battery tray
Drive: Four wheel with 4-link live rear axle
Transmission: Sealed metal gear
Differential: Three sealed spiral cut bevel
Radio: 2-channel Spektrum DX2E ACTIVE system with AVC (Active
Vehicle Control) built into receiver that allows driver to adjust
amount of traction control, system can also be switched off,
telemetry capable radio system (telemetry not included, separate
purchase required)
Steering Servo: Spektrum 9kg waterproof, 23T spline
Electronic Speed Control: Dynamite Fuze 130A sensorless, waterproof
Brushless Motor: Dynamite Fuze 3800Kv 550 size 4-pole, non-sensored
Suspension: Coil over, independent
Shocks: 12mm composite body, oil filled coil-over
Body: Molded polycarbonate with screened details
Tires: Maxxis Razr MT 4.65" diameter (118mm), medium soft compound
Wheels: 2.2" x 3.0" (56 x 76mm) mounting diameter, 12mm hex,
1.63" (41.4mm) wide
Ball Bearings: Complete set
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


RTR 1/10 scale TENACITY-DB Brushless Powered Desert Buggy
from Losi with screened Body, 2-ch Radio, 130A ESC,
3800Kv motor, four AA Batteries, Instruction Manual


LiPo Battery: 7.4 5000mAh 2S 30C Hardcase w/EC3 Connector, or
11.1V 5000mAh 30C 3S Hardcase w/EC3 connector
Battery Charger: Compatible with selected battery
LiPo Charging Bag
Track Equipment


Length: 21.1" (535mm)
Width: 11.7" (297mm)
Ground Clearance: 1.5" (38mm)
Wheelbase: 13.1" (332mm)
Gear Pitch: 1.0 module
Front and Rear Track: --" (--mm) distance from outer edges of
wheels measured side-to-side
Internal Gear Ratio: 3.89:1
Final Drive Ratio: 9.73:1
Pinion Gear: 16T
Spur Gear: 40T


Available in the following body colors:
Blue/Yellow, LOSD07BY
Red/Gray, LOSD07RE
For replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 12x18x4mm Fr Diff 1 DTXC1597
2 12x18x4mm Rear Diff 1 DTXC1597
2 10x15x4mm Fr Spindle & Carrier 1 DTXC1595
2 6x12mm Fr Spindle & Carrier 1 DTXC1569
2 10x15x4mm Rear Hubs 1 DTXC1595
2 6x12mm Rear Hubs 1 DTXC1569
2 5x11mm Fr Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
2 12x18x4mm Spur Gear Assembly 1 DTXC1597

jxs 05/18/18