Phoenix Model Bergfalke 3.3m EP Glider ARF 129.9"

Tower Stock# LC9204  •  Manufacturer Stock# PMMA1885
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
Easy Pay
Request 3 Payments of $114.33 Details
Notes from our tech department:
For Intermediate Fliers

FEATURES

Construction: Laser cut, all wood
Wing: Two-piece with wing tube, dual servo aileron control, can be
equipped with electric air brakes (not included)
Landing Gear: Single 2.9" (75mm) diameter wheel mounted in fuselage
Motor Mount: Plywood
Canopy: Clear plastic with painted-on frame lines

INCLUDES

Phoenix Model Bergfalke 3.3M Electric 3300 Scale 20% Almost Ready to
Fly Glider

REQUIREMENTS

Radio: 4-channel
Servos: Four mini high-torque (2-aileron, 1-rudder, 1-elevator)
Brushless Motor: RimFire .32 outrunner recommended
Electronic Speed Control: To match selected motor
LiPo Battery: 4S
LiPo Battery Charger and Charging Bag
Field Equipment

SPECIFICATIONS

Wingspan: 130" (3300mm)
Length: 62.6" (1590mm)
Wing Area: 1102 sq in (71.2 sq dm)
Wing Loading: 18.02g oz/sq ft (55g/sq dm)
Wing Type: HQ airfoil
Center of Gravity, CG: 0.62" (16mm) back from the leading edge of the
wing measured at the fuselage
Control Throws- Low Rate High Rate
Ailerons: Up & Down 0.35" (9mm) 10% expo 0.47" (12mm) 10% expo
Elevator: Up & Down 0.35" (9mm) 12% expo 0.47" (12mm) 12% expo
Rudder: Right & Left 0.98" (30mm) 15% expo 1.2" (45mm) 15% expo

COMMENTS

Following are the colors of ORACOVER used to cover this model;
#21010 White
#21023 Ferrari Red

jxs 07/02/19

Resources

References

Product Documents & Files

Manufacturer Contact Information