Tamiya 1/10 Toyota 4x4 Pick-Up Mountain Rider Ltd

Tower Stock# LC5050  •  Manufacturer Stock# TAM47394
Notes from our tech department:
For modelers 10 years of age and older.


Chassis: Ladder type, steel channel and resin cross members, front
metal underguard
Drive: Four wheel shaft
Differentials: Enclosed in die cast housings
Motor: 540 size brushed
Bushings and Ball Bearings
Suspension: Metal axle housings, leaf springs and shackles, radius
rod in rear
Shocks: Four, friction type aluminum bodies, tension can be adjusted
with separately available friction grease
Gearboxes: Closed
Transmission: 3-speed
Body: Rigid injection molded White in color, window set, plated
plastic bumpers, roll bar and body trim, plastic light lenses can
accomodate separately available LED light kit
Tires: 4.8 (123mm) diameter
Wheels: Metal plated with grayish chrome finish
Bumpers: White in color
Camber Tie Rods: Non-adjustable
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Steering: Bell-crank type with servo saver, 4-wheel steering can be
added by installing rear axle tension rod


Tamiya 110 scale Toyota Mountain Rider Limited Edition Pickup Truck
with Friction Shocks, 540 Motor, Molded Body, Window Section, Body
Trim, Decals, Plastic Light Lenses, Tires, Wheels, Instructions


Radio: 4-channel with 2 Servos
Radio Batteries: (8) AA size
Speed Control: Electronic with reverse
Battery: 6-cell stick pack with standard Tamiya connector
Charger: ACDC timed or peak for 6-cell battery
Misc. Items: Building and track equipment


Length: 21 (525mm)
Width: 10.9 (278mm)
Height: 10.8 (275mm)
Wheelbase: 11.3 (287mm)
Front Tread: 7.9 (200mm)
Rear Tread: 8.6 (218mm) distance from center of tires measured

jxs 071619




Manufacturer Contact Information