Kyosho 1/10 Monster Tracker Green MT EP 2WD RTR

Tower Stock# KYOC4403  •  Manufacturer Stock# 34403T1B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Easy Pay
Request 3 Payments of $43.33 Details
Notes from our tech department:
This is the Electric Powered, Radio Controlled, Readyset,
1/10 scale Ready to Run Monster Tracker Truck in Green from Kyosho.
Compatible with a wide range of optional parts for the Kyosho Sandmaster.


Chassis: Molded plastic, battery pack accessible on bottom of chassis
Drive: Rear wheel
Differential: Bevel gear type with flexible resin case
Radio: 2.4GHz Kyosho Synchro KT-232P with dual rate steering, and
steering and throttle trims
Steering Servo: Kyosho KS202W waterproof
Motor: Kyosho G-22, brush equipped 22 turn 540 size
Electronic Speed Control: Team Orion, reverse can be disabled, ESC
can be switched from NiMH to LiPo by changing a jumper wire
Shocks: Coil over plastic body with preload adjusters
Suspension: Double wishbone
Battery: Team ORION 1800mAh NiMH with T-plug connector
Battery Charger: AC wall type
Tires: All terrain rubber, 4.3" (110mm) diameter, 2.7" (70mm) wide
Wheels: Plastic, black in color
Steering: Servo saver equipped
Body: Trimmed and painted with green and gray color scheme
Caster: Non-adjustable, caster/toe-in refers to the angle of the
front suspension when viewed from the side of the car in relation
to the chassis
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Assembled Monster Tracker Truck with Motor, ESC, Radio System, NiMH
Battery, Wall Charger and Instruction Manual


AA Batteries: Four for transmitter
Track and maintenance equipment


Length: 16.1" (410mm)
Width: 11.8" (300mm)
Height: 6.9" (175mm)
Wheelbase: 10.6" (270mm)
Gear Ratio: 11.27:1
Front and Rear Tread: 9" (230mm) distance from center of tires
measured side-to-side
Weight: 4.2lbs (1900g) approximate with body
Length: 15" (380mm)
Width: 5.1" (130mm)
Height: 4.3" (109mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 6x12x4mm Fr Uprights 2 DTXC1569
4 6x12x4mm Rear Uprights 2 DTXC1569
4 5x8x2.5mm Gearbox 2 DTXC1523
2 12x18x4 Gearbox 1 DTXC1597

jxs 10/02/17



Product Documents & Files

Manufacturer Contact Information