Kyosho 1/8 INFERNO MP9e Evo. Kit

Tower Stock# KYOC4105  •  Manufacturer Stock# 34105B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Easy Pay
Request 3 Payments of $233.33 Details
Notes from our tech department:
This is the Kyosho Radio Controlled, Electric Powered
1/8 scale Inferno MP9e Evo. Buggy Kit.

FEATURES

Chassis: 0.12" (3mm) thick A7075 T6 aluminum, plastic side guards
Drive: Four wheel with heavy duty universal shafts
Differentials: Three bevel gear
Shocks: Hard plated aluminum cases with aeration caps for smooth
operation over extended periods
Shock Towers: 0.20" (5mm) thick aluminum
Suspension: Four wheel independent double wishbone, 2mm longer front
suspension arms than previous version for improved surface tracing
and cornering, dirt guards on rear arms
Motor Mount: Machined aluminum clamp type, predrilled holes for
mounting a cooling fan (not included)
Steering: Aluminum knuckles optimize Ackermann for smoother cornering
Ackermann refers to the effect of the inner front wheel rotating
faster than the outer front wheel during turns, new steering plate
with revised tie-rod mount position for increased control
Ball Bearings: Full set included
Battery Mount: Strap mounting system, lowered battery position for
better CG
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car,
new 17.5 angle caster hub cariers for increased steering response
and stability on rough tracks
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Rear Wing: Newly designed, two additional vertical fins for better
stability, two types of flaps can be added to increase rear grip
Body: Newly designed to sit lower with a less aggressive cabin
design combined with a stretched-out rooftop center fin for
better straight line stability

INCLUDES

Unassembled Inferno MP9e EVO Buggy kit w/Clear Body, Diff Oil, Decals
17mm Wheel Wrench, Cross Wrench, Hex Wrench, four Hex Wrenches and
Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Motor and ESC: Brushless, matching battery connector is also required
if ESC does not include one
Batteries: 1-2 (7.4-14.8V) LiPo packs, or 1-2 (7.2-14.4V) NiMH stick
packs
Battery Charger: Compatible with selected batteries
Tires and Wheels: 1/8 scale buggy with foam inserts
Shock Oil: Silicone
Paint, building and track equipment

SPECIFICATIONS

Vehicle;
Length: 19.3" (490mm)
Width: 12.1" (307mm)
Height: 7.1" (180mm)
Wheelbase: 12.8" (325mm) adjustable by changing rear hub collars
Front and Rear Tread: 10" (254mm) distance between center of tires
measured side-to-side
Gear Ratio: 10.14:1 (gear module 1.0)
Weight: 8.3lbs (3,770g) approximate
Body;
Length: 15.1" (385mm)
Width: 7.9" (200mm)
Height: 3.8" (96.5mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
3 8x16mm Front Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
2 5x11mm Front Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 08/28/18
ir/jxs

Resources

References

Manufacturer Contact Information