Kyosho 1/8 GP 4WD r/s INFERNO MP9 TKI4 (w/KT-331P)

Tower Stock# KYOC3314  •  Manufacturer Stock# 33014T1B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
Easy Pay
Request 3 Payments ($166.67, $166.66, $166.66) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 1/8 scale Glow Powered, 2.4GHz Radio Controlled,
Ready to Run Readyset Inferno MP9 TKI 4 Buggy from Kyosho.


Chassis: 0.12" (3mm) thick 7075 aluminum with wrap around side guards
molded front and rear chassis braces
Drive: Four wheel shaft with 3.5mm thick swing shafts, mud guards on
arms prevent dirt from entering drive shafts
Differentials: Three, high capacity center diff, narrow light weight
front and rear diffs
Radio: 2.4GHz Synchro KT-331P with high-torque metal gear KS5031-
09MW steering and throttle servos
Engine: KE21SP .21 cu in (3.4cc) with pull starter, glow plug and
large capacity air filter
Exhaust: Polished aluminum tuned pipe
Shocks: 16mm Big Bore with tapered pistons, hardened steel bushings
Shock Towers: 0.12" (3mm) thick 7075 aluminum
Suspension: Independent double wishbone, adjustable roll center,
front & rear stabilizer bars, 17.5 caster C-hubs improve
steering and stability on rough tracks
Brake Pads: Extra thick semi-metallic
Clutch: Two shoe
Wheels: MP9 white in color 3.3" (83.5mm) diameter, 1.6" (42mm)
wide, 17mm hex
Tires: Rubber construction with micro square pins 1.73" (44mm) wide
4.6" (116mm) diameter
Ball Bearings: Full set included
Fuel Tank: Includes splash guard, 4.2oz (125cc) capacity
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Radio Box: Low profile design protects components from dust and dirt
Body: 0.03" (0.8mm) thick clear untrimmed, flip top body system
allows easy maintenance, front inner fenders help protect chassis
from dirt, high downforce, screw mounted rear wing
Servo Mount: Upright for easy maintenance and dropped 2mm for better
center of gravity


RTR Inferno MP9 TKI 3 Buggy with Body, Decals, Wheels, Instructions,
Rear Wing, Fuel Tank, Air Filter, 2.4GHz Radio, .21 Engine with
Pull Starter, Tuned Pipe and Instruction Manual


AA Batteries: Eight, four for transmitter, four for battery box
Glow Fuel: Car blend with 10-30% nitro content (20% required for
Fuel bottle, glow igniter
Maintenance and track equipment


Length: 19.2" (490mm)
Width: 12.0" (307mm)
Height: 7.1" (180mm)
Wheelbase: 12.7" (325mm) adjustable
Ground Clearance: 0.8" (28mm)
Gear Ratio: 11.7:1
Weight: 7.4lbs (3370g) approximately
Length: 15" (378mm)
Width: 8" (203mm)
Height: 3.8" (96mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
3 8x16mm Front Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch Bell 1 DTXC1535

jxs 08/30/18



Manufacturer Contact Information