Kyosho 1/8 Inferno GT3 GP 4WD Kit

Tower Stock# KYOC3310  •  Manufacturer Stock# 33010B
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $329.70 Details
Notes from our tech department:
This is the 1/8 scale Radio Controlled, Glow Powered
Inferno GT3 On-Road Race Car Kit from Kyosho.
**Compatible with Kyosho MP9 Hop-Ups**


Chassis: 0.14" (3.5mm) thick aluminum with polished natural finish,
design based upon the World Champion Kyosho MP9
Drive: Four wheel shaft
Transmission: GT2 design, 2 speed
Differentials: Oil-filled bevel gear
Brake: MP9 type, extra thick semi-metallic pads
Shocks: Oil-filled short Big Bore configuration with Velvet Coating,
spring based on buggy shocks
Shock Towers: Machine cut high duralumin
Front Bumper: Foam, new design has wider position to better support
newer bodies, inner positions still included to fit older bodies
Fuel Tank: 5oz (150cc)
Body Mounting: Forward and rear mounting positions, 3rd body mounting
post for greater stability, bodies for GT2 can also be mounted
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Inferno GT3 On-Road Race Car Kit, Fuel Tank, Air Filter, Front
Bumper and Instruction Manual


Radio: 2-channel
Servos: Two, high-speed steering servo, standard throttle servo
Engine: .21 cu in (3.4cc) rear exhaust with tuned pipe
Receiver Battery: 5-cell hump configuration
Glow Fuel: Car blend with 10-30% nitro content, 20% recommended for
Body: 1/8 scale on-road car body
Wheels: 1/8 scale on-road with 17mm hex
Tires: 1/8 scale on-road with foam inserts
Glow starter, fueler bottle, paint, track and maintenance equipment


Length: 21.1" (537mm)
Height: 4.6" (116mm) without engine, body post
Wheelbase: 14.1" (359mm)
Front Tread: 10.3" (262mm)
Rear Tread: 10.5" (266mm) distance from center of tires measured
Gear Ratio: 1st speed 10.14:1 / 2nd speed 7.90:1
Weight: 7.2lbs (3,270g) approximately


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
4 5x10x4mm Fr Uprights 2 DTXC1535
4 8x16x5mm Rear Uprights 2 DTXC1585
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Ctr Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585
2 5x11x4mm Front Gearbox 1 DTXC1547
2 5x11x4mm Rear Gearbox 1 DTXC1547
2 8x16x5mm 2-sp Trans 1 DTXC1585
5 6x10x3mm Steering 3 DTXC1561
2 5x10x4mm Clutch 1 DTXC1535

jxs 08/09/17



Product Documents & Files

Manufacturer Contact Information