Kyosho Inferno Neo3.0 VE T2 Red

Tower Stock# KYOC1058  •  Manufacturer Stock# KYO34108T2
Easy Pay
Request 3 Payments of $143.33 Details
Notes from our tech department:


Chassis: Aluminum
Drive: Full-time 4WD shaft drive
Differentials: Precision machined bevel gears
Brushless Motor: Kyosho Speed House TORX8 2000kV
Electronic Speed Control: BRAINZ8 with 10 item programming system,
and cooling fan
Transmitter: 2.4GHz Synchro KT-231P+ 3-ch
Steering Servo: High speed and high torque
Shocks: Big Bore oil-filled, resin bodies
Suspension: 4-wheel independent double wishbone
Ball Bearings: Full set, 18 total
Tires: KC Cross with moto inspired block pattern
Wheels: 10-spoke, gray in color
Caster: Adjustable, caster angle can be changed by replacing bushings
castertoe-in refers to the angle of the front suspension when
viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Kyosho Readyset 1:8 scale Inferno NEO3.0 VE T1 Buggy with Red
Body, Motor, ESC, Radio System and Instruction Manual


AA Batteries: Four for transmitter
Batteries: Two 7.2V NiMH, or two 7.4V LiPo with T-plug connector
Battery Charger: Compatible with selected batteries
Large and Small Phillips Screwdriver, Track and Maintenance Equip.


Length: 19.5 in (496mm)
Width: 12.1 in (307mm)
Height: 7.4 in (189mm)
Weight: 7.8lbs (3,550g) approximately
Wheelbase: 12.7 - 12.9 in (323 - 328mm)
Front Tread: 10.1 in (258mm)
Rear Tread: 10.3 in (261mm) distance between center of tire measured
Gear Ratio: 12.7:1

jxs 031220



Manufacturer Contact Information