Kyosho LAZER ZX7 1:10 4WD Kit

Tower Stock# KYOC1054  •  Manufacturer Stock# KYO30048B
Notes from our tech department:
New Features-
2mm shorter front gullwing arms and wider front aluminum arm mounts
Caster adjustable front hub carriers 7, 10, 13 with revised Ackerman
knuckles
Lower roll center rear upper bulkhead
Wide rear aluminum arm mount
.5mm thinner 7075 hard anodized aluminum chassis for improved flex
Front and rear chassis braces also improving flex characteristics
Floating servo mount
Body
Lightweight slipper clutch with front and rear gear diffs
Wing and screw on mounts from the RB7
Adjustable length rear arms from the RB7
1.6mm and 1.7mm 2 hole pistons and shock caps from the RB7
74mm universal swingshafts for the front end.

FEATURES

Chassis: 7075 T6 milled hard coated aluminum with composite side
guards, chassis braces, chassis is narrower than the ZX6 for
optimal rigidity and lighter weight
Drive: Four wheel
Gearbox: Two-piece, sealed
Differentials: Gear type
Slipper Clutch: Light weight, replaces center gear diff, new joint
cup covers reduce wear and improve reliability
Shocks: Aluminum body, oil-filled big bore, one piece aluminum caps
and X-Gear springs
Shock Towers: One-piece-integrated with camber link mount
Wheels: Dish type, white in color, front 2.2" (56mm) diameter
(24mm) wide, rear 2.2" (56mm) diameter, 1.4" (36mm) wide
Suspension Arms: Aluminum
Body: Clear polycarbonate, cab forward design, high flow wing
Steering: Aluminum rack
Ball Bearings: Full set
Radio Box: Compatible with most current battery types
Motor Mount: Sliding design, along with adjustable battery placement
allows the use of shorty battery packs on either side, or saddle
packs
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

1/10 scale Kyosho Lazer ZX7 Racing Buggy Kit with Clear Body, Rear
Wing, Shocks, Wheels, Hex Hardware, X-GEAR Grease and
Instruction Manual

REQUIREMENTS

Radio: 2-channel
ESC: Compatible with selected motor
Motor: 6.5-17.5 turn brushless motor recommended
Tires: 1/10 scale front and rear buggy type
Battery: LiPo or NiMH shorty or saddle pack configuration
Battery Charger: Compatible with selected battery
Pinion Gear: 16-36T 48P steel
Paint, building and track equipment

SPECIFICATIONS

Vehicle;
Length: 15.1" (385mm)
Width: 9.7" (248mm)
Height: 5.7" (145mm)
Wheelbase: 10.9" (278mm)
Front Tread: 8.3" (210mm)
Rear Tread: 7.9" (200mm) center of tires, measured side-to-side
Gear Ratio: 2.5:1 second
Weight: 3.6lbs (1,650g) without electronics
Body;
Length: 11.5" (292mm)
Width: 5" (127mm)
Height: 2.8" (71mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 10x15mm Ball Diff Order number for ball
4 5x8mm Ball Diff bearings can be found in the
4 5x10mm Drive Gear Shaft Optional Parts & Accessories
4 5x8mm Steering section
2 10x15mm Slipper Clutch
4 5x10mm Front Hubs
4 5x10mm Rear Hubs

jxs 09/10/19
ir/jxs

Resources

References

Manufacturer Contact Information