Kyosho INFERNO GT2 EP Challenger Demon Readyset Orange

Tower Stock# KYOC1052  •  Manufacturer Stock# KYO34107
Notes from our tech department:
This is the Electric Powered, 2.4GHz Radio Controlled, Ready to Run,
1:8 scale Race Spec Inferno GT2 VE Dodge Challenger SRT Demon On-Road Car.

FEATURES

Chassis: Aluminum, with side guards
Drive: Four wheel shaft drive
Differentials: Spiral type ring & pinion gear
Radio: Kyosho Syncro KT-331P FHSS transmitter with jog dials, 15
mode memory, endpoint adjustment, dual-rate and exponential
settings, KR331 receiver
Steering Servo: High torque KS5031-09MW metal-geared servo
Motor: Speed House TORX8 2000Kv brushless
Electronic Speed Control: Speed House BRAINZ8 with T-plug battery
connector
Wheels: Five spoke, black in color
Tires: On road 3.8 x 1.6 (97 x 40mm) with foam inserts
Body: Trimmed and painted in vintage Go Mango orange
Front Bumper: Foam
Shocks: Oil-filled
Shock Towers: Composite plastic, 0.197 (5mm) thick
Ball Bearings: Full set, 18 total
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

Assembled Dodge Challenger SRT DEMON, wtrimmed & painted Body,
Motor, ESC, Radio System, Wrenches and Instruction Manual

REQUIREMENTS

AA Batteries: Four for transmitter
Battery: 3S LiPo with T-plug
Battery Charger: Compatible with selected battery
Track and maintenance equipment

SPECIFICATIONS

Vehicle
Length: 20.3 in (515mm)
Width: 12.2 in (310mm)
Height: 5.3 in (135mm)
Wheelbase: 14.2 in (360mm)
Front Tread: 10.3 in (262mm)
Rear Tread: 10.4 in (265mm) distance from center of tires side-to-
side
Gear Ratio: 8.95:1
Weight: 8.04lbs (3650g) approximate with body
Body
Length: 25.4 in (646mm)
Width: 11.6 in (294mm) measured at center between wheel wells
Height: 6.2 in (157mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location
4 8x16x5mm Fr Uprights
4 8x16x5mm Rear Uprights
2 8x16x5mm Fr Diff Bevel Gear
2 8x16x5mm R Diff Bevel Gear

Order number for ball bearings can be found in the
Optional Parts and Accessories section.

jxs 031120
irjxs

Resources

References

Manufacturer Contact Information