Kyosho 1/8 Inferno MP10 Nitro Buggy Kit

Tower Stock# KYOC1005  •  Manufacturer Stock# KYO33015B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
Easy Pay
Request 3 Payments of $233.33 Details
Notes from our tech department:
This is the 1/8 scale Glow Powered, Radio Controlled,
Inferno MP10 Buggy Kit from Kyosho.

Upgrades from the latest Inferno MP9 TKI4 include;
**.5mm Thicker Radio Plate**
**Newly Designed Upper Plate For Improved Traction & Steering**
**18g Lighter Chassis Side Guards**
**5mm Longer Rear Suspension Holder**
**New Shock Mounting Position For More Precise Damping**
**.5mm Larger Diameter Inner Hinge Pins**


Chassis: 0.12" (3mm) thick 7075 anodized aluminum with plastic side
guards, molded front and rear chassis braces
Drive: Four wheel shaft with 3.5mm thick swing shafts, mud guards on
arms prevent dirt from entering drive shafts
Differentials: Three, high capacity center diff, narrow light weight
front and rear diffs, lightweight bevel shafts in the front, center
and rear diffs improves throttle on/off response and braking
Shocks: Hard coated threaded Big Shock cases for smooth damping over
an extended period, 1.3mm x 8 hole pistons with aeration caps
Shock Towers: 0.20" (5mm) thick 7075 aluminum, grooved shock mounting
Suspension: I-arm design in front for easy adjustment and better
control, easier to install and lighter fixed length swaybar links,
geometry can be adjusted with aluminum suspension holders and
offset bushings, 4.5mm diameter inner hinge pins
Spur Gear: 47T for improved throttle response and acceleration
Brake Pads: Extra thick semi-metallic, secured with epoxy & indexed
to backing plate with two dowel pins
Clutch Shoes: Three, heavy duty aluminum
Wheels: White in color 3.3" (83.5mm) diameter, 1.6" (42mm) wide,
17mm hex
Ball Bearings: Full set included
Fuel Tank: Includes splash guard, 4.2oz (125cc) capacity
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
front hub carrier modified to increase caster from 13 to 17
for greater stability on bumpy surfaces and tight cornered courses
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Radio Box: Low profile design protects components from dust and dirt
Body: Clear, low profile with steeply angled nose section for better
Rear Wing: Newly designed, two vertical fins for better stability,
removable gurney flap for increasing rear grip, molded one-piece
wing stay reduces weight by 7 grams
Servo Mount: Upright for easy maintenance and dropped 2mm for better
center of gravity


Inferno MP10 Buggy Kit with Body, Decals, Wheels, Instructions,
Rear Wing, Fuel Tank, Fuel Filter, Air Filter, Servo
Horns and Fuel Tubing


Radio: 2-channel w/high torque steering servo
Engine: .21 cu in
Exhaust: Manifold and muffler for 1/8 scale buggy
Starter Box: For 1/8 scale buggy
Tires: 1/8 scale buggy
Glow Fuel: Car blend with 10-30% nitro content (20% required for
Fuel bottle, glow igniter
Shock, air filter and diff oils
Polycarbonate safe spray or brush-on paint
Maintenance and track equipment


Length: 19.2" (490mm)
Width: 12.0" (307mm)
Height: 7.1" (180mm)
Wheelbase: 12.9" (328mm) 4 settings with rear hub collar position
Ground Clearance: 0.8" (28mm)
Gear Ratio: 11.7:1
Front & Rear Tread: 10" (254mm) distance from center of tires
measured side-to-side, three rear settings
Weight: 118oz (3,360g) approximately


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
3 8x16mm Front Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch Bell 1 DTXC1535

jxs 05/07/19



Manufacturer Contact Information