Kyosho 1/10 Javelin Buggy 4WD Kit

Tower Stock# KYOC0618  •  Manufacturer Stock# KYO30618B
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the Radio Controlled, Electric Powered,
110 scale 4WD Javelin Buggy Kit from Kyosho.


Chassis: Narrow backbone-style, constructed of 6061T6 aluminum alloy
Drive: Four wheel, chain system with sealed compartment, system can
be changed to a belt drive
Differentials: Planetary gear
Suspension: Nylon construction double wishbone
Shocks: Aluminum body, stainless steel shafts, bore diameter
increased from 10mm to 12mm
Shock Stays: 6061T6 aluminum alloy
Radio Plate: FRP, suitable for any brand of ESC
Body: Polycarbonate with separate helmet
Rear Wing: Chassis mounted to generate high downforce
Gearbox: 48-pitch gear modules, nylon and sintered alloy gears,
equipped with adjustable slipper clutch
Tires: Rubber spike, 3.3 (86mm) diameter, 1.6 (40mm) wide, with
fam inserts
Wheels: One-piece, replicates original design, but are lighter in
weight, 12mm hexes
Ball Bearings: Full set uses 18 bearings (chain drive uses 16)
Caster: Adjustable front and rear, castertoe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis, replaceable inserts on rear hub carriers
allow three different toe angles, 0, 1 and 2


Javelin Buggy Kit with Wheels, Tires, Body, Driver Helmet, Shocks
Shock Oil, 25T Pinion Gear, Grease, Instruction Manual and two
Decal Sheets


Radio: 2-channel with high-torque steering servo
Motor: 540 size 20-27T
Battery: 7.2V NiMH stick pack or 2S LiPo (with compatible ESC)
Electronic Speed Control: Compatible with selected motor and battery
Transmitter batteries
Tools and maintenance equipment


Length: 15.9 (403mm)
Width: 9.4 (240mm)
Height: 5.1 (130mm)
Wheelbase: 10.2 (260mm)
Ground Clearance: 1.4 (36mm)
Front and Rear Tread: 8.0 (204mm) distance between center of tires
measured side-to-side
Weight: 3.7lbs (1700g) approximately
Gear Ratio: 9.24:1


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 10x15x4mm Gear Box 1 DTXC1595
2 5x10x4mm Gear Box 1 DTXC1535
2 3x6x2.5mm Counter Pinion Gear* 1 DTXC1503
2 10x15x4mm Fr Bulkhead 1 DTXC1595
4 5x10x4mm Front Hubs 2 DTXC1535
4 5x10x4mm Rear Hubs 2 DTXC1535
2 4x8x3mm Spur Gear 1 DTXC1511
*3x6x2.5mm counter pinion gear bearings are not used with chain

jxs 092717



Product Documents & Files

Manufacturer Contact Information