Kyosho 1/10 Lazer ZX-6 4WD Racing Buggy Kit

Tower Stock# KYOC0046  •  Manufacturer Stock# 30046B
Easy Pay
Request 3 Payments of $193.33 Details
Notes from our tech department:
This is the 1/10 scale Electric Powered, Radio Controlled
Lazer ZX6 Racing Buggy Kit from Kyosho.


Chassis: 7075 T6 milled hard coated aluminum with composite side
guards, chassis braces
Drive: Four wheel
Gearbox: Two-piece, sealed
Differentials: Tungsten ball equipped
Shocks: Aluminum body, oil-filled big bore, one piece aluminum caps
and X-Gear springs
Shock Towers: One-piece-integrated with camber link mount
Wheels: Dish type, white in color, front 2.2" (56mm) diameter
(24mm) wide, rear 2.2" (56mm) diameter, 1.4" (36mm) wide
Suspension Arms: Aluminum
Body: Clear polycarbonate, cab forward design, high flow wing
Steering: Aluminum rack
Ball Bearings: Full set
Radio Box: Compatible with most current battery types
Motor Mount: Sliding design, along with adjustable battery placement
allows the use of shorty battery packs on either side, or saddle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Lazer Z6 Racing Buggy Kit with Clear Body, Rear Wing, Shocks, Wheels
Rear Wing, Hex Hardware, Grease and Instruction Manual


Radio: 2-channel
ESC: Compatible with selected motor
Motor: 6.5-17.5 turn brushless motor recommended
Tires: 1/10 scale front and rear buggy type
Battery: LiPo or NiMH shorty or saddle pack configuration
Battery Charger: Compatible with selected battery
Pinion Gear: 16-36T 48P steel
Paint, building and track equipment


Length: 15.1" (385mm)
Width: 9.7" (248mm)
Height: 5.7" (145mm)
Wheelbase: 10.9" (278mm)
Front Tread: 8.3" (210mm)
Rear Tread: 7.9" (200mm) center of tires, measured side-to-side
Gear Ratio: 2.6:1 second
Weight: 3.6lbs (1,650g) without electronics
Length: 11.5" (292mm)
Width: 5" (127mm)
Height: 2.8" (71mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 10x15mm Ball Diff 2 DTXC1595
4 5x8mm Ball Diff 2 DTXC1523
4 5x10mm Drive Gear Shaft 2 DTXC1535
4 5x8mm Steering 2 DTXC1523
2 10x15mm Slipper Clutch 1 DTXC1595
4 5x10mm Front Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535

jxs 06/20/14



Product Documents & Files

Manufacturer Contact Information