Kinexsis 7.4V 300mAh 2S 35C LiPo: Blade 130X

Tower Stock# KXSA0003  •  Manufacturer Stock# KXSB0003
Shipping Note:Details
Product WarningDetails
Quantity Discounts Available
L5HBUA03
Save $.93
3 for $20.04
L5HBUA06
Save $2.10
6 for $39.84
L5HBUA12
Save $4.56
12 for $79.32
Notes from our tech department:

FEATURES

Fits the Blade 130X helicopter
Capable of maximum continuous discharge rates up to 35C
Pre-wired with a PH connector

INCLUDES

Kinexsis 3.7V 500Ah 25C 1S LiPo Battery with a PH Connector

REQUIREMENTS

LiPo Compatible Battery Charger

SPECIFICATIONS

Connector Type: PH
Voltage: 7.4V
Capacity: 300mAh
Cell Configuration: 2S1P
Charge Lead Length: 2" (50mm)
Charge Lead Wire Size: 26AWG
Dimensions, L, W, H: 2.13 x 1.18 x 0.28" (54 x 30 x 7mm)
Weight: 0.7oz (20g)
Maximum Continuous Discharge Rate: 35C
Maximum Continuous Discharge Current: 10.5A
Normal/Standard Charge Current: 300mA
Normal/Standard Charge Rate: 1C
Shape: Rectangular
Watt Hours: 2.22Wh

COMMENTS

ALWAYS use a LiPo-approved Charger and Cell Balancer
NEVER Charge over 4.2V per cell
NEVER Charge at currents greater than 1C
NEVER Trickle Charge
NEVER allow to Discharge below 2.5V per cell
NEVER disassemble or modify pack wiring in any way or puncture cells
NEVER place on combustible materials or leave unattended during
charging
ALWAYS Charge in a fireproof location
ALWAYS set charger's output volts to match battery volts
ALWAYS keep out of reach of children

jxs 05/07/18
ir/jxs

Resources

Manufacturer Contact Information