Hitec HS-5805MG Digital Mega Scale Metal Gear Servo

Tower Stock# HRCM5805  •  Manufacturer Stock# 35805S
Quantity Discounts Available
LM0173
Save $4.90
2 for $135.08
LM0174
Save $11.20
4 for $268.76
LM0175
Save $18.90
6 for $401.04
Notes from our tech department:
This is the Hitec HS-5805 Mega Scale Digital Metal Gear Servo.

FEATURES

For .60 class or larger aircraft, 1/4 scale car steering or throttle
and gasoline powered boats
Programmable digital amplifier with MOSFET drive
Four metal gears with resin first gear
Dual ball bearings
Heavy duty horns and hardware
Water and dust tight

INCLUDES

Hitec HS-5805 Mega Scale Servo with S Connector
Mega Horn and Hardware set, HRCM6318
Y-Harness
Instruction Sheet

REQUIREMENTS

Installing in model, connecting linkage and connecting to receiver,
see COMMENTS below

SPECIFICATIONS

Operating Speed: 0.19sec/60 @ 4.8V
0.14sec/60 @ 6.0V
Output Torque: 19.8kg cm (275oz-in) @ 4.8V
24.7kg cm (343oz in) @ 6.0V
Power Consumption: 800mA unloaded
Size: 2.59 x 1.18 x 2.26" (66 x 30 x 57.6mm)
Weight: 6.95oz (197g)
Length of Four Point Horn: 2.4" (61mm) at longest point
Length of Single Arm: 1.8" (47mm) from center of hole to end
Diameter of Round Horn: 1.6" (39.8mm)
Thickness of Horns: 0.20" (5mm)

COMMENTS

Due to the high power consumption of the servo, a NiCd or NiMH
battery with at least 1200mAh (preferably 5-cells and 6V) must be
used.
Also, with a BEC equipped receiver the power should be fed directly
to the servo without going through the BEC regulator. A Y-harness
and instructions are provided with servo.

jxs 01/11/10
ir/jxs

Resources

Manufacturer Contact Information