HoBao 1/8 Racing New Hyper VT On-Road GT Nitro RTR Blue

Tower Stock# HOAD3035  •  Manufacturer Stock# HB-VT-C30BU
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the Hobao 1/8 scale, Glow Powered, Radio Controlled,
Ready to Run New Hyper VT On-Road Car with Blue Body.


Chassis: Hard anodized T6 aluminum
Drive: Four wheel shaft,
Transmission: Automatic 2-speed
Differentials: Bevel gear
Engine: Hyper .30 cu in (4.9cc) with pull starter, large plastic
pull start handle Hobao T5 platinum glow plug, dual stage foam
air filter
Exhaust: Polished aluminum tuned pipe
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, HB5514 high output digital, waterproof, ball bearing
equipped steering servo, 194oz-in (14kg-cm) torque
Brake: Vented metal single disc
Clutch: Two-shoe composite, 18/22T steel clutch bell
Engine Mount: Finned aluminum for heat dissipation
Shocks: Oil-filled, aluminum body, 17mm Big Bore
Shock Towers: 0.16" (4mm) thick CNC aluminum
Suspension: Front and rear sway bars, front C-hub suspension with
CVAs and CNC aluminum front suspension block
Steering: Ball bearing equipped with servo saver
Tires: Slick rubber with foam inserts
Wheels: 1/8 scale on-road, gray in color, 17mm hex
Ball Bearings: Full set included
Body: Trimmed and painted with high downforce black plastic wing
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Front Bumper: Foam


RTR New Hyper VT Car with Shocks, Tires, Wheels, .30 cu in Engine
w/Pull Starter, Tuned Pipe, Glow Plug, Painted Body, Plastic Rear
Wing, Radio System and Instruction Manual


Nitro Fuel: Car blend with 15-30% nitro content, 30% required for
engine break-in
AA Batteries: 12, Eight for transmitter, 4 for battery box
Track and maintenance equipment


Length: 23.03" (585mm)
Width: 12" (305mm)
Height: 6.3" (160mm)
Wheelbase: 12.9" (328mm)
Weight: 8lbs (3,620g)
Length: 15.3" (390mm)
Width: 12" (305mm) at front wheels, widest point
10.4" (265mm) behind front wheels, narrowest point
Height: 4.9" (124mm)


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Steering Knuckles 1 DTXC1585
2 12x18mm Steering Knuckles 1 DTXC1597
4 6x10mm Steering 2 DTXC1561
4 8x16mm Rear Hubs 2 DTXC1585
2 8x16mm 2-Sp Assembly 1 DTXC1585
2 5x10mm Clutch Bell 1 DTXC1535

jxs 11/08/16



Product Documents & Files

Manufacturer Contact Information