Hangar 9 Carbon Cub FX-3 100-200cc ARF

Tower Stock# HANA1717  •  Manufacturer Stock# HAN5280
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Shipping Note:Details
Notes from our tech department:
For Advanced Level Pilots

FEATURES

Construction: Balsa and ply, Functional side double doors with
working scale locking mechanism and alloy handle, built-in
exhaust tunnel supports a variety of canister and pipe options
Wing: Two-piece plug-in with folding wing struts and removable
stabilizers, operational flaps for STOL capabilities
Aileron Control: Scale type flap hinges
Covering: Hangar 9 UltraCote film, White, True Red and Deep Blue
Cowl: Two-piece fiberglass for easy access to engine and fuel system
Landing Gear: Solid machined dampers with heavy duty springs, super
scale tailwheel, 8.5 in (216mm) diameter main wheels with
aluminum hubs
Lights: High output 3S compatible LED landing and navigation
Tow Release: Optional use mechanism included for towing a sailplane
Warranty: Horizon Hobby warrants to the original purchaser that the
product purchased (the Product) will be free from defects in
materials and workmanship at the date of purchase

INCLUDES

Hangar 9 CubCrafters Carbon Cub FX-3 100-200cc ARF with Landing Gear,
Tow Mechanism, LED Lights, Fuel Tank, Cockpit Panel, Instruction
Manual, Complete Hardware Kit with Hardware to Mount Engine
(engine not included)

REQUIREMENTS

Radio: At least 8-channel
High Torque Servos: Eight
Engine: 100 - 200cc gasoline
Receiver Battery: Three 4000mAh 2S 7.4V LiPo
12 Servo Extensions: Two
18 Servo Extensions: Two
24 Servo Extensions: Four
36 Heavy Duty Servo Extensions: Two
48 Heavy Duty Servo Extensions: Two
1.5 Aluminum 12 Servo Arms: Six
2.5 in Double Servo Arm: One
Propeller: Size dependent on engine selected
Ignition switch
Building and field equipment

SPECIFICATIONS

Wingspan: 165 in (422cm)
Length: 115 in (292cm)
Wing Area: 3979 sq in (256.7sq dm)
Wing Loading: 37.74 oz sqft (115.17 g sqdm)
Airfoil: Flat bottom
Scale: 40
Flying Weight: 55-61lbs (29.57kg)
Spinner: 6 in (152mm)
Wing Tube Length: 53 in (135cm)
Wing Tube Outer Diameter: 1-58 in (41cm)
Stabilizer Tube Length: 23 in (58cm)
Stabilizer Tube Diameter: 12 in (12mm)
Approximate Assembly Time: 20+ hours
Approximate Flight Duration: 10 minutes
Center of Gravity (CG): 6-8 in (152.4-203mm) measured from the
leading edge of the wing at the fuselage side

Control Throws:
Low Rate High Rate
Aileron: Up 1-1516 in (50mm) Up 3-18 in (80mm)
Down 1-916 in (40mm) Down 2-516 in (60mm)
Elevator: UpDown 1-316 in (30mm) 1-1516 in (50mm)
Rudder: Up Down 3-18 in (80mm) 5-18 in (130mm)
Flaps: Take Off 1-916 in (40mm), Landing 3-18 (80mm)

Expo:
Ailerons: Low 20 High 30
Elevator: Low 20 High 30
Rudder: Low 20 High 30

jxs 031020

Resources

References

Manufacturer Contact Information