Hangar 9 Ultra Stick 30cc ARF

Tower Stock# HANA1010  •  Manufacturer Stock# HAN2365
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:


Construction: Laser cut lightweight balsa and plywood with large
double beveled control surfaces
Wing: Two-piece plug-in with 1.25 (32mm) diameter aluminum joiner
Landing Gear: Main, one-piece prebent aluminum with tailwheel
and finished fiberglass wheel pants, float-ready hard
points built into fuselage for mounting the Hangar 9 15 scale
float set (sold separately)
Fuel Tank: 15oz (450cc)
Covering Hangar 9 UltraCote
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the Product) will be free
from defects in materials and workmanship at the date of purchase.


ARF Ultra Stick 30cc 81 Gasoline or Electric Powered Sport
Airplane with Prebuilt Wing, Tail and Fuselage sections, Landing
Gear, Fuel Tank, Engine and Motor Mounts and Instruction


Radio: At least 6-channel
Servos: Eight standard size
6 (152mm) Heavy Duty Servo Extensions: Four
12 (305mm) Heavy Duty Servo Extensions: Two
18 (457mm) Heavy Duty Servo Extensions: Two
Receiver Battery: 7.4V LiPo at least 2000mAh
Spinner: 3 2-blade aluminum
For Brushless Power
Brushless Motor: 160 size
ESC: 120A
LiPo Batteries: Two 6S 18.5V 30C 5000 - 7000mAh
Battery Charger: Compatible with selected battery
Propeller: 18x10E
For Engine Power:
Engine: 30cc 2-stroke gasoline
Standard Servo: For throttle
Receiver and Ignition Batteries
Three Wire Switch Harness
Gasoline Safe Fuel Tubing
Propeller: 17x8 pattern
Battery for engine ignition

Building and Field Equipment


Length: 74 (1880mm)
Flying Weight: 12 - 14lbs (5.4 - 6.35kg)
Wingspan: 80.75 (2051mm)
Wing Area: 1360 sq in (87.8 sq dm)
Wing Loading: 22.02 ozsq ft (67.20 gsq dm)
Airfoil: Symmetrical
Approximate Assembly Time: 10-15 Hours
CG (Center of Gravity): 4 - 5.25 (102 - 133mm) back from the
leading edge of the wing measured at the fuselage

Control Throws Low High
Ailerons: Up, 1-316 (30mm) 2-1116 (68mm)
Down, 1 (25mm) 2-532 (55mm)
Elevator, updown: 1-116 (27mm) 2-532 (55mm)
Rudder, rightleft: 1-38 (35mm) 2-34 (70mm)
Flaps: Mid, 1 (25mm) Landing, 2-532 (55mm)


Following are the Hangar 9 UltraCote colors used to cover this
airplane, and stock numbers for 2m rolls
White, HANQ1122
Black, HANQ1129
Apple Green, HANQ1160

If a replacement fuel tank is needed, the DuBro 14oz (DUBQ0214) with
the Gas Converion Stopper (DUBQ0675), or the Sullivan 14oz
(SULQ1442) with their Gas Conversion Kit (SULQ2684) may be used.
Some modification and trimming to the inside of the fuselage may be
required when installing any aftermarket tank.

jxs 080618



Product Documents & Files

Manufacturer Contact Information