Hangar 9 Model 12 Viking 120cc ARF (2 box)

Tower Stock# HANA1008  •  Manufacturer Stock# HAN1065
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:

FEATURES

Construction: Laser cut lightweight balsa and plywood
Wing: Two-piece plug-in with lightweight carbon fiber wing tubes
Cowl: Two-piece fiberglass, painted to match covering scheme
Canopy: Clear molded plastic with painted pilot figure
Landing Gear: Painted aluminum with finished fiberglass wheel pants
tail wheel assembly with carbon fiber bracket
Fuel Tank: 32oz (0.95l)
Covering Hangar 9 UltraCote
Firewall: Plywood, predrilled for most popular 100-120cc engines
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.

INCLUDES

ARF Model 12 Viking 120cc 89" Giant Scale Gasoline Powered Sport
Airplane with Prebuilt Wing, Tail and Fuselage sections, Landing
Gear, Fuel Tank, Tail Flying Wires and Instruction Manual

REQUIREMENTS

Radio: At least 9-channel
Servos: Eight metal gear, high-torque at least 400 oz/in
Servo Connector Clips and Arms
9" (229mm) Heavy Duty Servo Extensions: Two, bottom wing ailerons
18" (457mm) Heavy Duty Servo Extensions: Three, ignition battery, top
wing ailerons
24" Heavy Duty Servo Extensions: Five, elevators, bottom ailerons
and throttle
48" Heavy Duty Servo Extensions: Two, top wing ailerons
Receiver Battery: 7.4V LiPo at least 4000mAh
Spinner: 6" (152mm) aluminum P51 type
Engine: 100-120cc 2-stroke gasoline
Standard Servo: For throttle
Ignition Battery: 2000mAh LiPo
Three Wire Switch Harness
Gasoline Safe Fuel Tubing
Propeller: 27x11"

LiPo Charging Bag, Building and Field Equipment

SPECIFICATIONS

Length: 87" (2.21m)
Flying Weight: 26 - 28lbs (12 - 13kg)
Wingspan: 89.2" (2.26m)
Wing Area: 2490 sq in (161 sq dm)
Wing Tube Length: 33.75 in (858 mm) upper and lower, anti-rotation
pin: 13.2" (335mm)
Wing Tube Outer Diameter: 1.0 in (25.4 mm) (upper and lower), anti-
rotation pin 0.31" (8mm)
Airfoil: Symmetrical
Approximate Assembly Time: 20+ Hours
CG (Center of Gravity): 2.5" (63mm) back from the leading edge of the
wing measured at the fuselage, 2.4-2.7" (60-70mm) range

Control Throws Low 55% Expo High 60% Expo 3D 75% Expo
Ailerons, up down: 23 25% 45
Elevator, up/down: 10 15 45
Rudder, right/left: 25 45 45

COMMENTS

Following are the Hangar 9 UltraCote colors used to cover this
airplane, and stock numbers for 2m rolls;
Deep Blue, HANQ1127
Cub Yellow, HANQ1141
Silver, HANQ1137

If a replacement fuel tank is needed, the DuBro 32oz (DUBQ0290) can
be used.
Some modification and trimming to the inside of the fuselage may be
required when installing any aftermarket tank.

jxs 08/07/18
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information