Hangar 9 DHC-2 Beaver 30cc ARF (2 boxes)

Tower Stock# HANA1006  •  Manufacturer Stock# HAN4545
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:


Construction: Laser cut lightweight balsa and plywood
Wing: Two-piece plug-in with stabilizers and aluminum joiner tube,
quick connect/disconnect struts simplify field assembly, functional
flaps for enhanced flight characteristics and realism, fiberglass
wing tips
Cowl: Fiberglass, painted to match covering scheme, simulated radial
engine detail
Cockpit: Functional scale doors with spring-loaded latches,
corrugated scale surface detail on flight controls, seats and
instrument panel
Landing Gear: Painted aluminum with scale fiberglass fairings and
steerable tailwheel, accepts Hangar 9 1/4 scale floats (not
included, sold separately)
Covering Hangar 9 UltraCote
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


ARF DHC-2 Beaver 30cc 110" Gasoline or Electric Powered Sport
Airplane with Prebuilt Wing, Tail and Fuselage sections, Landing
Gear, Fuel Tank, Engine and Motor Mounts and Instruction


Radio: At least 6-channel
Servos: Six standard size (7 for gasoline power option)
12" (305mm) Servo Extensions: One
9" (229mm) Heavy Duty Servo Extensions: Two
18" (457mm) Heavy Duty Servo Extensions: Four
24" (610mm) Heavy Duty Servo Extensions: Two
For Brushless Power
Brushless Motor: 160 size
ESC: Compatible with selected motor
LiPo Batteries: Two 5S 18.5V 30C 5000 - 7000mAh
Battery Charger: Compatible with selected battery
For Engine Power:
Engine: 30cc 2-stroke gasoline
Standard Servo: For throttle
Receiver and Ignition Batteries
Three Wire Switch Harness
Gasoline Safe Fuel Tubing

Propeller, Building and Field Equipment


Length: 66" (1680mm)
Flying Weight: 16.5 - 17.25lbs (7.5 - 8.3kg)
Wingspan: 110" (280cm)
Wing Area: 1485 sq in (95.8 sq dm)
Approximate Assembly Time: 15-20 Hours
Wing Tube Length: 25.6" (650mm)
Wing Tube Outer Diameter: 1.06" (27mm)
CG (Center of Gravity): 3-3/8 - 4-1/8" (86 - 105mm) back from the
leading edge of the wing measured at the fuselage

Control Throws Low High
Ailerons: Up, 5/8" (16mm) 10% expo 13/16" (21mm) 10% expo
Down, 9/16" (14mm) 10% expo 3/4" (19mm) 10% expo
Elevator, up/down: 13/16" (21mm) 1" (25mm)
Rudder, right/left: 1" (25mm) 15% expo 1-1/4" (32mm) 15% expo
Flaps: Mid, 1-7/16" Landing, 2-13/16" (76mm)
Flap to Elevator Compensation: Mid-Flap, 5/32" (4mm) down
Landing, 5/16" (8mm) down

jxs 08/06/18



Product Documents & Files

Manufacturer Contact Information