This is the Futaba Ball Bearing S9001 Servo.|
This servo has one servo horn attached, three extra
servo horns and mounting hardware.
This servo can produce high-current draw from your batteries.
If using NiMH or LiPo batteries, make sure they are capable
of delivering sufficient amps.
Final gear has a single ball bearing for fast transit time.
Coreless motor for smooth and fast response.
Ideal application for airplanes, sailplanes, helicopters, nitro or
electric powered boats.
One year warranty
One Futaba Ball Bearing S9001 Servo with J connector and one 0.83
(21mm) round servo horn, one 1.38 (35mm) servo horn, one 4 point
1.53 (39mm) servo horn, one 6 point 1.26 (32mm) servo horn, four
rubber grommets, four 2mm x 11mm self-tapping phillips head screws
and four brass eyelets.
Phillips screwdriver to mount servo.
Dimensions: 1.6 x 0.8 x 1.4 (1-916 x 1316 x 1-716)
(40 x 20 x 36mm)
Weight: 1.7oz (1-1116oz) (48g)
Torque: 54 oz-in (3.9 kg-cm) 4.8V
72 oz-in (5.2 kg-cm) 6V
Transit Time: 0.22 sec60 4.8V
0.18 sec60 6V
Warranty: Futaba warrants this servo for one year against defects in
material or workmanship.
If extra accessory bag is needed use Futaba part FSH42 (FUTM3550).
A note on coreless motors-a conventional servo motor has a steel core
armature wrapped with wire that spins inside the magnets. In a
Coreless design, the armature uses a wire mesh that forms a cup
that spins around the outside of the magnet. This arrangement is
much lighter resulting in smoother operation and faster response
updt jxs 102904