Futaba 6K V2 8-Channel S-FHSS/T-FHSS Heli System

Tower Stock# FUTK6110  •  Manufacturer Stock# FUTK6110
Futaba 6K V2 8-Channel S-FHSS/T-FHSS Heli System (large view)
Easy Pay
Request 3 Payments of $78.33 Details
Notes from our tech department:
This is the Futaba 2.4GHz 6K Helicopter Radio System
with the R3006SB T-FHSS SBUS, SBUS2 Receiver.
Servos and Sensors Not Included.
This is the helicopter version which will default to heli settings
when powered up and does not have a ratcheted throttle stick.

The 6K is more versatile than ever, thanks to Version 2 firmware that adds
two more channels. This makes it possible for the 6K to accept additional
accessories, including optional SBS-01C and SBS-01V telemetry sensors that
gather real-time data for motor current, battery voltage and capacity. Other
new features include expanded Multicopter flight modes and a unique "Throttle
Integrate" option that links the timer speed to throttle position. Download
the V2 firmware now to get the most out of your 6K!


Telemetry system (T-FHSS) with data speech (via earphones) provides
data on receiver battery voltage, external voltage, temperature
RPM, altitude and variometer, current, capacity and voltage
(sensors not included and must be purchased separately, see
S.Bus/S.Bus2 servo setting functions programmable through transmitter
R3006SB receiver can use SBus as the main link/communication to
servos, or a combination of SBus and conventional outputs together
Programmable mixing (3-Normal, 1-Curve) for airplanes, helicopters
gliders and multi-rotors
Four assignable switches, three 3-position and one 2-position
Switch/VR position change and AUX channel function change
Updateable software through the Futaba CIU-2 USB PC Interface, or
CIU-3 Interface, not included

Airplane Functions;
Wing Type (5-wing, 2-tail)
Throttle Cut
Aileron Differential
Dual Rate/Expo
Throttle Curve
Idle Down
Air Brake
Elevator to Flap Mixing
Flap to Elevator Mixing
Elevon Mixing

Glider Functions;
Wing Type (5-wing, 2-tail)
Condition Select
Butterfly Mixing
Dual Rate/Expo
Trim Mixing
Motor Switch
Elevator-to-Camber Mixing
Aileron to Camber Mixing
Aileron Diffrential
Camber Mixing

Helicopter Functions;
Swash Type (6)
Condition Select
Throttle Cut
Dual Rate/Expo
Trim Offset
Gyro Mixing
Swash AFR
Swash Mixing
Throttle Curve (5-point)
Pitch Curve (5-point)

Pitch to Rudder Mixing
Throttle Hold
Hovering Throttle
Hovering Pitch

Multicopter Functions;
Flight Mode
Center Alarm
Dual Rate/Expo
Throttle Curve
Throttle Delay

Wing Type (5-Wing, 2-Tail)
Throttle Cut
Dual Rate/Expo
Throttle Curve
Idle Down
Aileron Differential
Elevon Mixing
Elevator to Flap
Flap to Elevator

Transmitter also compatible with S-FHSS receivers
30 model memory, model naming up to 8 characters
Auxiliary channel
Parameter functions
Servo monitor/test
Throttle position warning
Wireless model data transfer
Timer-system & model (Up/Down/Down-Stop) with vibration alert
Trainer system
Fail safe
End points
Built-in full range antenna
One year limited warranty through the Futaba Service Center
beginning at date of purchase


Futaba 2.4GHz 6K Helicopter Transmitter
R3006SB Receiver, FUTL7683
Switch Harness


AA Batteries: Four for transmitter
Servos and sensors of modeler's choice


Transmitting Frequency: 2.4GHz band
System: T-FHSS Air, S-FHSS switchable
Power Supply: Four AA batteries
Power Requirement: 4.8V~7.4V battery or regulated output from ESC
Size: 1.7 x 0.98 x 0.35 " (43.1 x 25.0 x 8.8 mm)
Weight: 0.3 oz. (8.5g)
Battery: F/S Voltage


The following Futaba sensors are available;
SBS-01T Temp Sensor, FUTM0854
SBS-01TE EP Temp Sensor, FUTM0856
SBS-01RM Magnet Type RPM Sensor, FUTM0852
SBS-01RO Optic RPM Sensor, FUTM0853
SBS-01RB Brushless Motor RPM Sensor, FUTM0857

jxs 08/31/15



Product Documents & Files

Manufacturer Contact Information

Futaba is a registered trademark of Futaba Corporation.