FMS Fox 3000mm Aerobatic EP Glider PNP

Tower Stock# FMMA1862  •  Manufacturer Stock# FMM107P
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:

FEATURES

Construction: EPO foam, repairs can be made with foam safe adhesives
such as hot glue, foam safe CA and 5 minute epoxy, two-part
fuselage with twist lock design, plug type horizontal stabilizer
requires no glue or hardware for installation
Wing: Two-piece with functional flaps, and 1.8mm thick carbon fiber
wing tube
Canopy: Clear plastic with painted pilot bust and instrument panel
detail
Motor: 4258-Kv460
Electronic Speed Control: 70A with EC3 battery connector
Servos: Six high torque 23g metal gear
Propeller: 7.5x15 folding, aluminum construction
Landing Gear: Scale wheels embedded into fuselage, wing tips and
tail, 3.3" (85mm) diameter main landing wheel

INCLUDES

FMS FOX 3000mm Electric Powered Glider with Brushless Motor, 70A ESC,
six Servos, Folding Propeller and Instruction Manual

REQUIREMENTS

Radio: 6-channel with receiver
LiPo Battery: 6S 22V 5000mAh 35C
Battery Charger: Compatible with selected LiPo battery
Charging bag and field equipment

SPECIFICATIONS

Wingspan: 9.8' (3000mm)
Length: 6.1' (1873mm)
Weight: 10.3lbs (4700g)
Wing Loading: 21.14 oz/sq ft (64.5g/sq dm)
Assembly Time: 10 minutes
Approximate Flying Duration: 30 minutes
Center of Gravity (CG): 3.5 - 3.7" (90 - 95mm) back from leading
edge of wing measured at the fuselage
Control Throws Low Rate High Rate
Elevator 0.63" (16mm) 0.79" (20mm)
Aileron 0.47" (12mm) 0.71" (18mm)
Rudder 0.79" (20mm) 0.94" (24mm)

jxs 12/18/18
ir/jxs

Resources

References

Product Documents & Files

Manufacturer Contact Information