E-flite Extra 300 3D 1.3m PNP

Tower Stock# EFLA2312  •  Manufacturer Stock# EFL11575
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Easy Pay
Request 3 Payments of $83.33 Details
Money Saving Combos
Money Saving Combos
 
L7LCGK
Notes from our tech department:

FEATURES

Experience Level: Skill level 3 - experience required
Construction: Fully molded EPO airframe, composite reinforced for
rigidity and durability, factory finished with a vivid paint
scheme and bold graphics
Wing: Two-piece plug-in with carbon fiber wing tube, dual servo
aileron control
Control Surfaces: Oversized for maximum 3D aerobatic capability
Motor: 4250 910kV brushless outrunner
ESC: 60A
Servos: Four 23g factory-installed digital metal gear
Propeller: Wooden 13x6E
Canopy: Clear molded plastic, detailed cockpit with instrument panel
and painted pilot figure
Hatch: Magnetically secured, convenient access to battery and
electronics
Spinner: 2" (53mm)

INCLUDES

E-flite Extra 300 3D 1.3m PNP (Plug-n-Play) Basic Civilian Sport
Scale Airplane with Motor, ESC, Propeller, four Servos, Hardware
Hardware and Instruction Manual

REQUIREMENTS

Transmitter & Receiver: At least 5-channel DSMX/DSM2
LiPo Battery: 3S or 4S 2200-3200mAh with EC3 or IC3 connector
Battery Charger: Compatible with selected battery
LiPo Charge Bag

SPECIFICATIONS

Wingspan: 51.5" (1308mm)
Length: 49.6" (1260mm)
Wing Area: 572 sq in (36.9 sq dm)
Wing Loading: 13.4 - 15.1 oz/sq in (40.9 - 46 g/sq dm)
Flying Weight: 53.3-59.8 oz (1510-1696 g)
Airfoil: Fully symmetrical
Center of Gravity: 3.5 - 4" (90-100mm) measured from leading edge of
wing at fuselage
Approximate Assembly Time: Less than one hour
Wing Tube Length: 23.6" (600mm)
Wing Tube Outer Diameter: 0.39" (10mm)
Stabilizer Tube Length: 15.7" (400mm)
Stabilizer Tube Outer Diameter: 0.24" (6mm)
Control Throws: Low Rate Expo High Rate Expo
Elevator, up/down: 1.8" (45mm) 15% 2.4" (60mm) 30%
Aileron, 1.5" (38mm) 15% 1.9" (50mm) 30%
Rudder, left/right: 2.7" (70mm) 15% 3.9" (100mm) 30%

jxs 01/08/19

Resources

References

Product Documents & Files

Manufacturer Contact Information