E-flite Carbon-Z T-28 BNF Basic with AS3X

Tower Stock# EFLA1004  •  Manufacturer Stock# EFL1350
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 4 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:
For Flyers Ages 14 and Above.


Construction: Rigid Carbon-Z construction for a rigid airframe
Wing: Two-piece bolt-on wing panels and stabilizers, operational
flaps with individual installed servos, fiberglass wing joiner
Canopy: Large canopy hatch with latch closure, pilot figure, cockpit
detail, cowling features dummy radial engine
Landing Gear: Tricycle type electric retractable, scale landing gear
strut details and two-piece main gear doors
Brushless Motor: E-Flite 60-size brushless outrunner
Electronic Speed Control: 70A, switch mode BEC, EC5 connector
Servos: Seven metal gear, micro servo for nosewheel steering
Receiver: Spektrum 6-ch AR636A DSMX with AS3X (Artificial
Stabilization - 3aXis) that counters effects of wind and turbulence
by combining 3-axis sensing with specially tuned flight control
software, also includes Panic Recovery Mode, a feature of SAFE
(Sensor Assisted Flight Envelope) that returns airplane to level
flight at the push of a button
Propeller: 2-blade
Warranty: Horizon Hobby, LLC, (Horizon) warrants to the original
purchaser that the product purchased (the "Product") will be free
from defects in materials and workmanship at the date of purchase.


E-flite Carbon-Z T-28 BNF (Bind-n-Fly) Basic w/AS3X Receiver, seven
Servos, ESC, Motor, Propeller, Pilot Figure and Instruction Manual


Transmitter: Full-range 2.4GHz 6-channel w/Spektrum DSM2/DSMX
technology with programmable dual rates and exponential
LiPo Battery: 22.2V 6S 3500 - 5000mAh 6S 30C w/EC5 connector
Battery Charger: Compatible with selected battery
Field equipment


Length: 63" (162cm)
Wingspan: 78" (198cm)
Wing Area: 1073 sq in (70 sq dm)
Flying Weight: 12.0lbs (5.5kg)
Center of Gravity (CG): 11.5" (292mm) forward of trailing edge of
wing at flap root
Control Throws: Low Rate High Rate
Elevator, up/down: 3/4" 7/8"
Aileron, up/down: 1-1/4" up 1-1/8 down 1-7/16" up, 1-1/4" down
Rudder, left/right 1-9/16" 2"
Flap: full 3-1/8" half 1-9/16"
Flap Elevator Mix: 1/16" down 1/8" down

EXPO; Low Rate High Rate
Elevator: 5% 5%
Aileron: 0% 5%
Rudder: 0% 10%

jxs 06/13/18