Dumas 1/8 Chris-Craft Cobra Kit 27"

Tower Stock# DUMB0752  •  Manufacturer Stock# 1232
Easy Pay
Request 3 Payments of $73.75 Details
Notes from our tech department:
This is a DUMAS 1/8 scale Replica of the the 1955 CHRIS CRAFT COBRA.

FEATURES

Double planked hull with birch plywood and mahogany veneer
Complete chrome diecast fitting set
Pre-formed ABS plastic turtle deck, fin, and cockpit
Complete running hardware kit with bronze prop

INCLUDES

One complete instruction manual and plans/setup sheet
One sheet of DUMAS/CHRIS CRAFT decals
Vacuum formed ABS turtle deck/fin, and cockpit
Clear lexan windshield
Eight mahogany frame formers
Fifty six mahogany deck planking strips
Twenty eight birch sub-planking sections
Nine spruce turtle deck stringers
Three spruce motor mounting/keel blocks
Five Basswood jackstaffs
One Mahogany nose block
Twelve styrene deck planking sheets and turtle deck seam
Five assorted size brass hardware tubes
Six NO.4 " pan head screws
One 18" length of cockpit kit coaming tubing
One plexiglass instrument panel sheet
Cast metal navigation lights, ventilators, handles, step plates,rings
and steering wheel.
Complete Running Hardware Kit with Bronze Prop

SPECIFICATIONS

Length: 27"
Beam: 9"
Weight: (approx.)
Scale: 1:8

REQUIREMENTS

Motor: One 550-size (15 to 27 turn) with a standard 1/8" shaft
or Dumas #2004 6V scale or #2025 6V high speed motor
Radio: 2 Channel
Servo: One Heavy Duty and One Standard
One 7.2V 6 Cell Battery, Charger, and Building Equipment
One Heavy Duty Mechanical Speed Control w/Resistor
Or Electronic Speed Control.
WLG 10-30-98
ir/jl

Resources

References

Manufacturer Contact Information