This is a .5oz (14.8mL) bottle of Duratrax Paint in Flourescent Red|
for Polycarbonate RC Vehicle Bodies.
NOTE; It is very important to spray thin, even coats to avoid runs or
heavy build up. Be careful not to apply paint too thick, use too
many coats, or not allow paint to fully cure between coats.
Any more than three coats of paint will start to cause issues with
the color and result in a slight yellowish gold appearance.
May be applied by brush, spray or airbrush
For use on the underside of polycarbonate plastic RC bodies
Apply at temperatures between 60-80°F (15-26°C) and low humidity
For best results, pearl and metallic colors should be applied by
airbrush or spray. Flourescent colors should be backed by white.
Pearl, metallic and candy colors can be top coated with any color,
especially light colors for added brilliance.
.5oz (14.8mL) bottle of Duratrax RC Vehicle Paint
Cleaning equipment with PC68 Thinner (DTXR4068) after use
Extremely flammable, vapors may cause flash fire
Vapors harmful, causes eye irritation
Contents under pressure
Keep out of reach of children
First Aid; If swallowed, do not induce vomiting. In case of eye
contact, flush thoroughly with water. For skin, wash thoroughly
with water. If you experience difficulty in breathing, leave the
area to obtain fresh air. Get medical attention.
updt jxs 04/29/16