Castle Creations SW4 WP Sensorless ESC 1415-2400 Snsrd

Tower Stock# CSEC6407  •  Manufacturer Stock# 010-0164-07
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the Castle Creations Sidewinder 4 Sensorless Electronic Speed Control
for 1/10 scale Sport Applications and the 1415 2400Kv 4-Pole Brushless Motor.

Ideal for 1/10 scale 2WD and 4WD short course trucks
up to 6.5lbs using a 3-4S LiPo battery.

FEATURES

Sidewinder 4 ESC;
Recommended for 1/10 scale RC vehicles weighing up to 6.5lbs
(2.9kg)
Sensorless brushless and/or brushed motor compatibility
Can be powered by a 2-3S LiPo, or 6-8 NiMH battery
5V fixed, 2A BEC (battery eliminator circuitry)
Cryo-drive technology, a combination of software enhancements and
precision fluid dynamics offers reduced operating temperatures in
all applications
Redesigned case for optimum airflow
Compatible with the optional Castle Link USB programmer (not included
order CSEM6300
Large high-rate 30mm cooling fan
Waterproof in normal operation, see COMMENTS below;

1415 1Y 2400Kv Sensored Brushless Motor;
Ideal for 1/10 scale 2WD and 4WD short course trucks up to 6.5lbs
using a 3-4S LiPo battery
High-strength 180C grade neodymium sintered magnets with high-
strength wrap
High-temperature, high purity copper windings
High-performance 0.2mm steel lamination stacked stator
Vibration dampening wave spring on shaft
Rotor position sensor eliminates cogging and inconsistency during
startup
CNC machined 6061 T-6 aluminum endbells and motor can
13AWG high strand count silicone insulated wires with 4mm male bullet
connectors
Four pole configuration for maximum efficiency at high RPM
ROAR standard sensor port and labeled connections
Replaceable front end bell/bearing assembly and rotor/shaft assembly

INCLUDES

Sidewinder 4 ESC with two Receiver Wires with Standard Connectors
4mm Bullets for Motor Connection, On/Off Switch, Motor Wires
1406 5700Kv Sensored Brushless Motor, Sensor Wire and Instructions

REQUIREMENTS

Battery Plug and Pinion Gear depending on application

SPECIFICATIONS

Sidewinder 4 ESC (CSEM6400);
Input Voltage Range: 2-3S LiPo, or 6-8 NiMH battery
BEC: 5.0 volts fixed, 2 amps
Brake: Proportional
Reversible: Yes, can be disabled for racing
Length: 2.08" (52.92mm)
Width: 1.50" (38.05mm)
Height: 1.28" (32.56mm)
Weight 2.26oz (64g)
Battery Lead Wire Size: 13 gauge
Telemetry Link Capable: Yes

1415 1Y 2400Kv 4-Pole Sensored Brushless Motor (CSEC6000):
Input Voltage Range: 3-4S LiPo
Kv: 2400
Max RPM: 75,000
Length: 2.7" (69.5mm)
Diameter: 1.4" (36mm)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.61" (15.5mm)
Weight: 11.2oz (318g)
Mounting Hole Size: M3 @ 25mm

COMMENTS

Not intended for operation while submerged in liquid, fan is splash
resistant but should be removed from the ESC before prolonged
exposure to liquids.

jxs 02/16/18
ir/jxs

Resources

Manufacturer Contact Information