Castle Creations SW4 WP Sensorless ESC 1406-7700 Snsrd

Tower Stock# CSEC6404  •  Manufacturer Stock# 010-0164-04
Notes from our tech department:
This is the Castle Creations Sidewinder 4 Sensorless Electronic Speed Control
for 1/10 scale Sport Applications and the 1406 7700Kv Sensored Brushless Motor.

Ideal upgrade for 1/10 scale on-road cars using 2s LiPos, may also be
used in some lighter off-road 1/10 scale stadium trucks and
buggies with conservative gearing.

**NOT for use in 2WD or 4WD short course trucks.**

FEATURES

Sidewinder 4 ESC;
Recommended for 1/10 scale RC vehicles weighing up to 6.5lbs
(2.9kg)
Sensorless brushless and/or brushed motor compatibility
Can be powered by a 2-3S LiPo, or 6-8 NiMH battery
5V fixed, 2A BEC (battery eliminator circuitry)
Cryo-drive technology, a combination of software enhancements and
precision fluid dynamics offers reduced operating temperatures in
all applications
Redesigned case for optimum airflow
Compatible with the optional Castle Link USB programmer (not included
order CSEM6300
Large high-rate 30mm cooling fan
Waterproof in normal operation, see COMMENTS below;

1406 7700Kv Sensored Brushless Motor;
Ideal upgrade for 1/10 scale on-road cars using 2s LiPos, may also be
used in some lighter off-road 1/10 scale stadium trucks and
buggies with conservative gearing
Four magnet, four pole configuration for maximum efficiency at high
RPM
1.4" diameter slotted rotor
High quality ball bearings

INCLUDES

Sidewinder 4 ESC with two Receiver Wires with Standard Connectors
4mm Bullets for Motor Connection, On/Off Switch, Motor Wires
1406 7700Kv Sensored Brushless Motor, Sensor Wire and Instructions

REQUIREMENTS

Battery Plug and Pinion Gear depending on application

SPECIFICATIONS

Sidewinder 4 ESC
Input Voltage Range: 2S LiPo, 6-8 cell NiMH
Kv: 7700
Max. RPM: 100,000
Max. Recommended Vehicle Weight: 4lbs (1814g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 6.9oz (197g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet
1406 7700Kv Sensored Brushless Motor (CSEC5900);
Input Voltage Range: 2-3S LiPo, 6-8 cell NiMH
Kv: 5700
Max. RPM: 100,000
Max. Recommended Vehicle Weight: 5lbs (2278g) with battery RTR
Length: 1.9" (49.5mm)
Diameter: 1.4" (36mm)
Weight with Wires: 7.1oz (202g)
Shaft Diameter: 1/8" (3.17mm)
Shaft Length: 0.59" (15mm)
Mounting Hole Specifications: M3 @ 25mm
Connectors: 4mm Male Castle Bullet

COMMENTS

Not intended for operation while submerged in liquid, fan is splash
resistant but should be removed from the ESC before prolonged
exposure to liquids.

jxs 02/20/18
ir/jxs

Resources

Manufacturer Contact Information