Castle Creations Mamba X 25.2V WP ESC/1512-1800kV Motor

Tower Stock# CSEC5506  •  Manufacturer Stock# 010-0155-06
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 5 (see larger view)
  • Thumbnail 6 (see larger view)
Notes from our tech department:
This is the Castle Creations Mamba X Extreme 1/10 scale Waterproof ESC
with the 1512 4-Pole 1800Kv Sensored Brushless Motor.

Ideal for 1/8 scale off-road and on-road vehicles as well as 1/10 scale 4WD
Short Course Trucks up to 9lbs. (ROAR 1/8 MOD APPROVED).


2S - 6S input voltage range
Smartsense uses motor's sensors for smooth starts, excellent torque
and low-speed drivability - then transitions to the sensorless
mode with electronic timing, Smartsense automatically advances
timing for peak performance during all driving conditions
On-the-fly adjustments can be made through the AUX wire once enabled
in Castle Link, then settings can be tuned from transmitter while
Recordable real-time data such as RPM, battery current and voltage,
ESC and motor temperature, throttle input and more
Audible alerts
CNC aluminum case
12AWG high strand count silicone insulated battery wires

4 pole 12 slot design for high degree of efficiency and less heat
SMARTSENSE uses motor's sensors to provide smooth starts, excellent
torque and low-speed drivability-once motor is turning it
transitions to sensorless mode
High strength neodymium sintered magnets with high strength Kevlar
Low resistance gold-plated solder tabs
Hardened stainless steel shaft
ROAR standard sensor port and labeled connections
High performance 0.2mm steel lamination stacked stator
CNC machined anodized 6061 T-6 aluminum motor can and endbells
Rebuildable design allows replacement of front end bell/bearing
assembly or rotor/shaft assembly
One year limited warranty through Castle Creations beginning at date
of purchase


Mamba X Extreme 1/10 scale Electronic Speed Control, CSEM9500
Replaceable Wire Harness with Receiver Wire, AUX Wire, Fan Connector,
and Waterproof Switch
Replaceable Motor Sensor Harness
12AWG Battery Wires
Cooling Fan
6.5mm Gold Plated Bullet Motor Connectors
1512 4-Pole 1800Kv Sensored Brushless Motor
Sensor Wire


Battery connectors to match selected battery


Input Voltage Range: 2S - 6S LiPo
BEC: 5.25V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Programmable: Fully programmable with Castle Link USB Adapter, and
downloadable Castle Link Windows software
Telemetry Link Capable: Yes
Brake: Proportional
Reverse: Yes, may be disabled for racing
Cooling Fan: 1.2" (30mm) removable
Dimensions: 2.14 x 1.39 x 1.18" (54.4 x 35.2 x 30mm)
Max Recommended Vehicle Weight: 9lbs (4kg) with batteries, ready to

Input Voltage Range: 3-4S LiPo
Kv: 1800
Max RPM: 60,000
Length: 2.7" (67.7mm)
Diameter: 1.6" (40mm)
Weight: 13.6oz (385g)
Shaft Length: 0.79" (20mm)
Shaft Diameter: 0.196" (5mm)
Mounting Hole Specs: M3 and M4 @ 25mm
Connectors: 6.5mm Male Castle Bullet Connectors attached to 10 gauge
Sensor Wire Length: 8.3" (210mm)

jxs 09/20/17


Manufacturer Contact Information