Castle Creations 1/18 Mamba Micro X WP ESC/4100kV Motor

Tower Stock# CSEC4701  •  Manufacturer Stock# 010-0147-01
Notes from our tech department:
This is the Castle Creations Mamba Micro X Waterproof Electronic Speed Control
with the 0808-4100Kv Brushless Motor.


For 1/18 scale 2 or 4 wheel drive vehicles weighing up to
2.25lbs (1.02kg)
Heavy-duty BEC (battery eliminator circuit) handles high-draw
digital servos
Adjustable settings include;
Throttle Punch Control
Braking Curve Reverse Type
Drag Brake Motor Type
Auto LiPo Cutoff
Profiles can be custom designed on a PC with the Castle Link
PC programming software (software not included, can be
downloaded for free from Castle's website, voucher is included for
free Castle Link Programmer)
Programmable Auxiliary Wire (AUX) allows adjustments to several
settings such as torque control and max throttle from a compatible

4100Kv Motor:
Ideal for on and off road applications running up to 3S LiPos, and
weighing up to 2.5lbs (1134g)
4 Pole brushless, sensorless design
One year limited warranty on both components through Castle Creations
beginning at date of purchase


Mamba Micro ESC
0808 4100Kv Motor with 3.5mm Female Bullet Connectors
Motor Leads with 3.5mm Male Bullet Connectors
Pretinned Battery Leads (require connector to mate w/selected
battery, 4mm Castle Creations connectors recommended)
On/Off Switch
Receiver Connector
Instruction Booklet
Voucher for free Castle Link Programmer


Compatible LiPo Battery, recommended battery capacity for 1/18 scale
vehicles is 1500mAh, 30C or higher continuous discharge
Pinion and spur gear depending on application


Input Voltage Range: Min. 2S LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Brake: Proportional
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector

Maximum Input Voltage: 3S LiPo
Maximum Operating Temperature: 180F (82C)
Motor Size: 1.5 x .79" (38 x 20mm)
Shaft Diameter: .08" (2mm)
Weight: 1.8oz (50g)
Mounting Hole: 1/2" 14mm, 5/8"
Connectors: 3.5mm gold female


Not intended for operation while submerged in liquid. If unit is
operated in wet conditions, rinse with fresh water to remove
dirt or corrosives, then fully dry unit.

jxs 08/18/15


Manufacturer Contact Information