Castle Creations 1/8 Monster 2 WP ESC + 2650kV Motor

Tower Stock# CSEC0804  •  Manufacturer Stock# 010-0108-04
  • Thumbnail 1 (see larger view)
  • Thumbnail 6 (see larger view)
Easy Pay
Request 3 Payments ($78.32, $78.31, $78.31) Details
Quantity Discounts Available
L5GTPE03
Save $31.71
3 for $673.11
L5GTPE06
Save $70.44
6 for $1339.20
Notes from our tech department:
This is the Mamba Monster 2 25V Electronic Speed Control
and the 2650Kv Sensored Motor from Castle Creations.

**Sensored capabilities of this motor cannot be utilized with the**
**Mamba Monster 2 ESC. If sensored operation is required, a sensored**
**ESC such as the Mamba Monster X must be used.**

FEATURES

Intended for up to 4S (14.8 Volt) operation in 18 scale on or off-
road vehicles and 110 scale 4WD short course trucks up to 9lbs
(4.08kg) including batteries, ready-to-run

2650Kv Sensored Brushless Motor
High strength neodymium sintered magnets with high strength Kevlar
wrap
High performance 0.2mm steel laminated stacked stator
Four pole configuration for maximum efficiency at high RPM
Vibration dampening wave spring
High-temperature, high purity copper windings
CNC machined 6061-T6 anodized aluminum can and endbells
Hardened stainless steel shaft
Low resistance gold-plated solder tabs
10AWG high strand count insulated wire with 6.5mm female bullet
connectors
Sensor board with temperature stabilized sensors

Mamba Monster 2 25V ESC
Waterproof design allows running in nearly any environment (see
COMMENTS below)
Profiles can be custom designed on a PC with the Castle Link
PC programming software (software not included, can be
downloaded for free from Castles website, voucher is included for
free Castle Link Programmer)
Solder posts allow battery wire length and direction to be easily
changed
One year limited warranty through Castle Creations beginning at date
of purchase. Warranty does not cover abuse, neglect, or damage due
to incorrect wiring, over voltage or overloading

INCLUDES

Mamba Monster 2 Electronic Speed Controller with Cooling Fan
1515-2650kv Sensored Brushless Motor
Coupon for free Castle Link USB Adapter
Drivers Ed and Quick Start Guides
Castle Decal Sheet

SPECIFICATIONS

ESC, CSEM0800
Input Voltage: 2S-6S LiPo
BEC: Adjustable: User selectable between 5 and 7V, default 5.5V
Brake: Proportional
Revesible: Yes, may be disabled for racing
Cooling Fan: 1.2 (30mm) removable
Dimensions: 2.19 x 1.86 x 1.33 (56 x 47 x 34mm)
Weight: 3.93oz (111.5g) without battery connector

Motor, CSEC6100:
Kv: 2650
Input Voltage Range: 2S-4S LiPo
Max RPM: 60,000
Weight with Wires: 13.6oz (385g)
Mounting Hole Specifications: 3mm & 4mm screw holes 1 (25.4mm)
spacing
Motor Diameter: 1.6 (41.4mm)
Motor Length: 2.7 (67.7mm)
Shaft Diameter: 0.197 (5mm)
Shaft Length: 0.79 (20mm)
Connector: 6.5mm male bullets

COMMENTS

Not intended for use while submerged in liquid. Fan on ESC is not
water resistant. Remove fan from ESC before exposing vehicle to
liquids.

jxs 072717
irjxs

Resources

Manufacturer Contact Information