Associated 1/8 RC8B3.1e Team 4WD Buggy Kit

Tower Stock# ASCD0936  •  Manufacturer Stock# 80936
  • Thumbnail 1 (see larger view)
  • Thumbnail 2 (see larger view)
  • Thumbnail 3 (see larger view)
  • Thumbnail 6 (see larger view)
Only manufacturer discounts can be applied to this product's purchase. Tower coupon codes may not be applied.
Notes from our tech department:
This is the Team Associated Radio Controlled, Electric Powered, 18 scale
RC8B3.1e Team Buggy Kit.

New features that differ from the RC8Be include
**H.T.C. (High Torque Capacity) Differentials**
**Revised Suspension Arm Pivots for More Ground Clearance**
**Anti-roll Linkage Curves Altered for More Chassis Support**
**New Shock Springs**
**Pro-Line Predator Body**


Chassis: 0.12 (3mm) thick hard anodized 7075-T6 aluminum with keyed
lower suspension plates
Drive: Four wheel, 94mm CVA shafts, straight cut gears provide
great acceleration and increased run time
Gearboxes: Bevel gear type with 3.38:1 ratio
Differentials: H.T.C. (High Torque Capacity) for greater fluid
capacity and more consistent feel
Shocks: 6061 aluminum 16mm Big Bore with bleeder style caps, new
shock springs-0.79 (20mm) inner diameter
Shock Towers: 7075-T6 aluminum
Suspension: Anti-roll linkage curves altered to provide more chassis
support throughout suspension travel, all arm pivots revised for
more ground clearance resulting in better jumping and landing and
greater durability
Motor Mount: Two-piece sliding design for easy motor removal and gear
mesh adjustment
Body: Clear untrimmed Pro-Line Predator buggy
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RC8B3.1 Team Buggy Kit with Shocks, Body, Wing, Instruction Manual
Decals, Shock and Differential Fluid


Radio: 2-channel with high-torque steering servo
Motor & ESC: Brushless type for 18 scale buggies, Reedy Sonic
1512 series recommended
Battery: 4S LiPo
Battery Charger: To match selected battery
Wheels and Tires: 18 scale buggy
LiPo charging bag, glue, tools
Polycarbonate safe spray or brush-on paint


Length: 19.21 (488mm)
Width and weight vary with motor, ESC, wheels and tires used in the
finished kit
Wheelbase: 12.9 (327.5mm)
Battery Tray Dimensions: 5.7 x 2 x 0.79 (145 x 51 x 20mm)
Length: 15.8 (401mm)
Width: 7.7 (195mm)
Height: 4.1 (104mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Ctr. Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585
4 6x10x3mm Steering 2 DTXC1561
4 5x8x2.5mm Steering 2 DTXC1523
2 6x12x4mm Fr Gearbox 1 DTXC1569
2 6x12x4mm Fr Gearbox 1 DTXC1569
4 8x16x5mm Flanged Fr Uprights 1 ASCC1565
4 8x16x5mm Flanged R Uprights 1 ASCC1565

jxs 032717



Product Documents & Files

Manufacturer Contact Information