This engine mount is replacing the existing 60-120 size mounts from GPM.|
Adjustable width glass filled nylon mount.
Right and left halves of mount, four 8-32x1" machine screws, four
#8 washers, four #8 lock washers & instructions w/ mounting template.
Overall length: 4-1/2" Usable beam length: 2-3/4"
Mounting width: Min: 1-7/16", Max: 1-7/8"
Mounting beam width: 9/16" Firewall bolt pattern: 1-7/8"x 1-7/8"
Locknuts or blind nuts (8-32) for machine screws, and self-tapping
screws for mounting the engine to the engine mount.
Locknuts GPMQ3348, blind nuts GPMQ3328
Has holes for nose gear in both upright and side mount.
This mounts hole pattern does not work with the old MM60 mount.