Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor

Tower Stock# LXHDJ2  •  Manufacturer Stock# HCAP0332
Hobbico VoltWatch2 4.8V/6V Rx Battery Monitor (large view)
Quantity Discounts Available
Save $4.94
2 for $25.04
Notes from our tech department:
This is the VoltWatch2 on-board Receiver Battery Monitor for
4.8V and 6V NiCd and NiMH receiver packs.
This mounts on the outside of the airplane, so you can see at a glance
the status of the receiver battery mounted inside.


7-LEDs provide instant, accurate battery voltage status of Low, Safe,
or Max. Only one LED glows at a time
Small switch to select 4.8V or 6V battery
Very lightweight, only .15oz (4.3g) unit can mount on the side
of the fuselage, or under the plane's canopy
Draws amazingly low current - from 4-34mA depending on the battery
Plugs into any open receiver channel using a Futaba J connector
One year warranty


One VoltWatch2 On-Board Receiver Battery Monitor w/Futaba J plug
One 1.5"x1" piece of double sided mounting tape


Plugging into any unused receiver port
Mounting onto the airplane with double-sided tape


Length: 1.65" (42mm)
Width: .63" (16mm)
Height: .16" (4mm)
Weight: .15oz (4.3 grams)
Current Draw: approx 4-34mA
Lead Length: 198mm (7.79")


This has a Futaba J connector pre-installed. For radios other than
Futaba, you will have to change or modify the plug.


Manufacturer Product Web Page
Manufacturer Mailing Address
Additional Manufacturer Contact Info