Phoenix Model Stinson Reliant 30-35cc Gas/EP ARF 68.8"

Tower Stock# LXGZPZ  •  Manufacturer Stock# PH180
  • front/side (see larger view)
  • bottom (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Easy Pay
Request 3 Payments ($140.01, $139.99, $139.99) Details
Money Saving Combos
 
LZ0451
 
LZ0443
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Electric or Gasoline Powered, 1:5 3/4 ARF
Stinson Reliant from Phoenix Model.
For Intermediate Level Flyers.

FEATURES

Construction: All wood, laser cut
Wing: Bolt-on two piece, dual servo aileron and flap control
Cowl: Fiberglass, painted to match covering scheme, black plastic
radial engine detail
Landing Gear: Main, fixed two-piece aluminum construction, 3.9"
(100mm) wheels, 1.8" (47mm) tail wheel
Wheel Pants:
Fuel Tank: Approximately --oz (--cc)
Spinner: 3.1" (80mm) diameter
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser.

INCLUDES

Preassembled Fuselage, Wing and Tail Assemblies, Landing Gear,
Fuel Tank, Cowl, Wheel Pants, Linkages, Hardware and Instruction
Manual

REQUIREMENTS

Radio: 8-channel minimum
Servo: High torque, standard size. 2-aileron, 2-flap, 2-elevator,
1-rudder, 1-throttle if using gas engine
For Electric Power;
Motor:
ESC:
Battery:
Propeller:
Battery charger, LiPo charging bag
For Gasoline Power;
Engine: 30-35cc
Servo for throttle
Propeller

Building and field equipment

SPECIFICATIONS

Length: 68.8" (1748mm)
Wingspan: 86.6" (2200mm)
Wing Area: 1322 sq in (85.4 sq dm)
Wing Loading: 30.14 oz sq/ft (92 g sq/dm)
Flying Weight: (7900 - 8100g)
Wing Joiner Tube:
Center of Gravity (CG): 5" (128mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low High
Aileron, up/down: 0.43" (11mm) 0.51" (13mm)
Elevator, up/down: 0.43" (11mm) 0.51" (13mm)
Rudder, right/left: 0.98" (25mm) 1.6" (40mm)
Flaps: Mid 0.79" (20mm) down Landing 1.02" (26mm) down

COMMENTS


jxs 02/12/18

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info