Kyosho 1/10 Javelin Buggy 4WD Kit

Tower Stock# LXGYEU  •  Manufacturer Stock# 30618B
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Radio Controlled, Electric Powered,
1/10 scale 4WD Javelin Buggy Kit from Kyosho.

FEATURES

Chassis: Narrow backbone-style, constructed of 6061T6 aluminum alloy
Drive: Four wheel, chain system with sealed compartment, system can
be changed to a belt drive
Differentials: Planetary gear
Suspension: Nylon construction double wishbone
Shocks: Aluminum body, stainless steel shafts, bore diameter
increased from 10mm to 12mm
Shock Stays: 6061T6 aluminum alloy
Radio Plate: FRP, suitable for any brand of ESC
Body: Polycarbonate with separate helmet
Rear Wing: Chassis mounted to generate high downforce
Gearbox: 48-pitch gear modules, nylon and sintered alloy gears,
equipped with adjustable slipper clutch
Tires: Rubber spike, 3.3" (86mm) diameter, 1.6" (40mm) wide, with
fam inserts
Wheels: One-piece, replicates original design, but are lighter in
weight, 12mm hexes
Ball Bearings: Full set uses 18 bearings (chain drive uses 16)
Caster: Adjustable front and rear, caster/toe-in refers to the
angle of the suspension when viewed from the side of the car in
relation to the chassis, replaceable inserts on rear hub carriers
allow three different toe angles, 0, 1 and 2

INCLUDES

Javelin Buggy Kit with Wheels, Tires, Body, Driver Helmet, Shocks
Shock Oil, 25T Pinion Gear, Grease, Instruction Manual and two
Decal Sheets

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Motor: 540 size 20-27T
Battery: 7.2V NiMH stick pack or 2S LiPo (with compatible ESC)
Electronic Speed Control: Compatible with selected motor and battery
Transmitter batteries
Tools and maintenance equipment

SPECIFICATIONS

Length: 15.9" (403mm)
Width: 9.4" (240mm)
Height: 5.1" (130mm)
Wheelbase: 10.2" (260mm)
Ground Clearance: 1.4" (36mm)
Front and Rear Tread: 8.0" (204mm) distance between center of tires
measured side-to-side
Weight: 3.7lbs (1700g) approximately
Gear Ratio: 9.24:1

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 10x15x4mm Gear Box 1 DTXC1595
2 5x10x4mm Gear Box 1 DTXC1535
2 3x6x2.5mm Counter Pinion Gear* 1 DTXC1503
2 10x15x4mm Fr Bulkhead 1 DTXC1595
4 5x10x4mm Front Hubs 2 DTXC1535
4 5x10x4mm Rear Hubs 2 DTXC1535
2 4x8x3mm Spur Gear 1 DTXC1511
*3x6x2.5mm counter pinion gear bearings are not used with chain
drive

jxs 09/27/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info