Hacker Model Bellanca Super Decathlon 60 Electro EP ARF

Tower Stock# LXGXVV  •  Manufacturer Stock# HC1008A
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Electric Powered Almost Ready to Fly
Bellanca Super Decathlon Semi Scale Aerobatic Airplane.
For Intermediate and Advanced Pilots.
Recreational acrobatic model is also suitable for towing gliders.

FEATURES

Construction: Balsa and ply
Cowl: Painted fiberglass
Wing: NACA 2412 wing profile, two piece with struts, dual servo
aileron and flap control, vacuum formed plastic wing tips
Landing Gear: Main, one-piece aluminum, prebent wire tail gear
wheel pants,
3.5" (90mm) diameter main wheels, 1.5" (38mm) tail wheel
Windshield: Clear molded plastic
Motor Mount: Plywood

INCLUDES

Preassembled Wing, Fuselage and Tail Sections, Decals, Plastic
Dashboard with Decal for Instruments

REQUIREMENTS

Radio: At least 5 channel
Servos: Six standard size, 2-aileron, 2-flap, 1-rudder, 1-elevator
6" (150mm) Servo Extensions: Four
12" 305mm) Servo Extensions: Four
Y-Harness: 6-8" (150-200mm) if controlling flaps with one channel
Motor: Brushless outrunner such as the Great Planes ElectriFly
RimFire .80 50-55-500 Brushless Motor, GPMG4740
Electronic Speed Control: Castle Creations Talon 90 (CSEM9700) if
using motor listed above
Propeller: 16x8E recommended
LiPo Battery: 5-6S at least 4000mAh
LiPo Battery Charger & Charging Bag, Buillding and Track Equipment

SPECIFICATIONS

Length: 53.1" (1350mm)
Wingspan 79.5" (2020mm)
Weight: 8.7lbs (3950g)
Center of Gravity (CG): 3.9" (100mm) back from leading edge of wing
measured at the fuselage
Control Throws;
Ailerons, up 1.4" (35mm), down 0.79" (20mm), 30% expo
Elevator, up/down: 0.98" (25mm), 30% expo
Rudder, left/right: 0.87" (22mm), 30% expo
Flaps, down: 0.98" (25mm) 0% expo

jxs 10/24/17

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info