RC4WD 1/10 Trail Finder 2 RTR w/Chevrolet Blazer Body

Tower Stock# LXGXCG  •  Manufacturer Stock# Z-RTR0035
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Electric Powered, Ready to Run,
1/10 scale RC4WD Trail Finder 2 with Chevrolet Blazer Body Set.

FEATURES

Chassis: Machine billet aluminum ladder frame with leaf springs
adjustable scale shock hoops, chassis servo mounts and hard body
mounts
Drive: Four wheel with heavy duty uni-joint shafts for high degree
of articulation and durability on the trail
Transmission: TCI heavy duty R4 single speed scale transmission and
realistic center mounted 4x4 transfer case, V8 scale engine mounted
on transmission
Transfer Case: Hammer Transfer Case with cast metal exterior and
heavy duty .8 Mod widened gears
Axles: RC4WD Cast Yota with round knuckles, lower mounting points
and compact offset pumpkins
Motor: 540 size brush equipped 45 turn with sealed endbell for
increased durability
Electronic Speed Control: Outcry II waterproof with built-in drag
brake for constant reliable power
Radio: XR3 3-channel 2.4GHz pistol grip
Steering Servo: Twister high torque digital metal gear, 153oz/in
(11.01kg/cm) torque at 6.0V
Body: Trimmed and painted hard plastic with separate trim parts,
dismountable roof, chrome plated parts and colored lenses for all
signal lights
Tires: 1.9" Prowler XS (XTREME SCALE) edition, 1.9" (48mm) inner
diameter, 1.41" (36mm) wide, 3.76" (95.5mm) outer diameter, X3
soft and sticky compound
Wheels: Raceline Monster 1.9" beadlock in black and silver, 1.08"
(27.5mm) wide, 1.9" (48mm) outer diameter, pin type hub
Shocks: Six Superlift Superide 80mm with internal springs
Battery: 7.2V 6-Cell 3000mAh NiMH with Standard connector
Battery Charger: NiMH peak type 110V wall charger

INCLUDES

Assembled RC4WD Trail Finder 2 with Chevrolet Blazer Body Set, Motor,
ESC, Radio System, 3000mAh NiMH Battery, Wall Charger, four AA
Batteries for Transmitter, Decals and Instruction Manual

REQUIREMENTS

Track and maintenance equipment

SPECIFICATIONS

Vehicle-
Wheelbase: 7.8" (200mm)
Width: 19.8" (503mm)
Height: 9.3" (237mm)
Ground Clearance: 2.4" (62mm)
Hex to Hex Axle Width: 7.04" (179mm)
Yota Axle Ratio: 15/40 = 2.67:1
Hammer Transfer Case Gear Ratio: 1.47:1
Transmision Gear Ratio: 10.1:1
Final Drive Ratio: 31.9:1
Weight: 8.44lbs (3.83kg)
Body-
Width: 11.7" (299mm)
Height: 5.7" (145mm)
Length: 19.8" (502mm)
Weight: 42.33oz (1200g)

jxs 11/08/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info