Multiplex Fun Glider RR 51.18"

Tower Stock# LXGWSJ  •  Manufacturer Stock# M264273
  • front/side (see larger view)
  • bottom (see larger view)
  • packaging (see larger view)
Easy Pay
Request 3 Payments ($57.01, $56.99, $56.99) Details
Money Saving Combos
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric Powered, Multiplex Fun Glider
RR (Receiver Ready).
For Intermediate to Expert Fliers.


Construction: Elapor foam to resist damage, white in color
Wing: Two-piece with two pre-installed aileron servos
Aileron Control: Dual servo
Motor: Permax brushless BL-O 2816-0900
Servos: Four nano sized
Electronic Speed Control: MULTIcont BL-20 SD
Propeller: 9x6 folding


Multiplex Fun Glider RR with Brushless Motor, Servos, ESC, Decals and


Radio: 6-channel
LiPo battery: 3S at least 950mAh such as the Venom 3S 1300mAh
(VNRA2528) NOTE, if using this battery the battery connector on the
ESC must be cut off and replaced with a Dean's Male Ultra Plug to
mate with the Dean's plug supplied with this battery
Battery Charger: Compatible with selected LiPo battery
Charging Bag, Field & Maintenance equipment


Wingspan: 51.18" (1300mm)
Wing Area: Approx. 317.8 sq in (20.5 sq dm)
Wing Loading: Min 9.5 oz/sq ft (28.9 g/sq dm)
Overall Length: 31.49" (800mm)
Weight: 20.81 oz (590g)
Control Functions: Aileron, Elevator, Rudder, Throttle
Center of Gravity (CG): 2.24" (57mm) back from the leading edge of
the wing measured at the fuselage

Control Throws-
Elevator: Up 0.39" (10mm), Down 0.39" (10mm)
Rudder: Right to Left 0.59" (15mm)
Ailerons: Up 0.47" (12mm), Down 0.24" (6mm)
Spoilers: Both ailerons up 0.55" (14mm)
Elevator Compensation-
Spoilers: 0.14" (3.5mm) down
Power: 0.039" (1mm) down
RPM/V: 900
Optimum Working Range: 10-14A
Max Current for 15 sec.: 18A
Max Output: 200W
Max Rotational Speed: 15,000 Umin
Shaft Diameter: 4mm
Can Diameter: 1.1" (28mm)
Can Length: 1.2" (31mm)
Weight: (72g)
Mounting Holes: 4xM3 (19 / 16mm)


This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with an
activator is the only method of gluing recommended by the

jxs 08/18/17

Know Before You Fly
Easy RC: Sailplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info